PortaPack H1
About the PortaPack H1 PCB
PortaPack H1 is an open source PCB design by arsscriptum, published on GitHub. It is a board measuring 120 × 75 mm, with 83 components from 33 distinct parts.
Other key parts include the AK4951EN, REGULATOR_SOT23_5, 5M40ZE64, CAT4004[_AB] and NUF4220MN. By type, the board carries 36 capacitors, 17 resistors, 8 connectors, 6 ICs, 6 test points and 2 diodes.
It belongs with the rf & radio designs in this gallery.
From the project
smart-meter rever engineering
PortaPack H1 is portability add-on hardware for the HackRF One software-defined radio (SDR).
The schematic was drawn using KiCad 4.0.6.
Schematic symbols are cached in the design files, but are also available in a separate repository:
https://github.com/sharebrained/library-kicad/
The circuit board was designed using KiCad.
PCB footprints are cached in the design files, but are also avaliable in a separate repository:
Main components on the PortaPack H1
PortaPack H1 bill of materials (BOM)
83 components, 33 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AK4951EN | IPC_QFN33P40_400X400X80L35X20T280N | U1 |
| 1 | REGULATOR_SOT23_5 | IPC_SOT23-5P95_275X135L40X40N | U2 |
| 1 | 5M40ZE64 | IPC_QFP65P40_900X900X120L60X18T450N | U3 |
| 1 | CAT4004[_AB] | IPC_SON9P50_200X200X55L32X24T90X160N | U4 |
| 1 | NUF4220MN | IPC_SON9P50_200X200X100L30X25T80X120N | U5 |
| 1 | DNP | IPC_QFN17P50_300X300X100L40X25T160N | U6 |
| 1 | HEADER_1X3 | JST_S3B-PH-SM4-TB | J1 |
| 1 | MICROSD_DETSW | ALPS_SCHA4B0419 | J2 |
| 1 | ER-TFT024-3_FPC | ER-CON50HT-1 | J3 |
| 1 | DNP | JST_S2B-PH-SM4-TB | J4 |
| 1 | TRRS_SW_JACK | CUI_SJ-43516-SMT | P2 |
| 1 | HACKRF_ONE_P20 | HEADER_11X2_REV_SM_254_AP | P20 |
| 1 | HACKRF_ONE_P22 | HEADER_13X2_REV_SM_254_AP | P22 |
| 1 | HACKRF_ONE_P28 | HEADER_11X2_REV_SM_254_AP | P28 |
| 1 | BATTERY | MPD_BU2032SM-BT-G | BT1 |
| 4 | HOLE1 | HOLE_3200UM_VIAS | H2, H3, H4, H5 |
| 1 | ER-TFT024-3_PANEL | ER-TFT024-3 | LCD1 |
| 1 | 220R | IPC_RESCAXS8P80_320X160X60L30X45N | RP1 |
| 1 | CK_TSWB-3N-CB | CK_TSWB-3N-CB222_LFS | SW1 |
| 6 | TP | TP_1MM | TP1, TP2, TP3, TP4, TP5, TP6 |
Show 13 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | DNP | IPC_LEDC1608X90L40N | D1, D2 |
| 4 | DNP | IPC_CAPC2012X135L45N | C1, C15, C16, C41 |
| 11 | 100N | IPC_CAPC1005X55L25N | C2, C3, C4, C5, C27, C28, C29, C30 +3 |
| 4 | 2U2 | IPC_CAPC1608X90L35N | C6, C8, C10, C12 |
| 12 | 10U | IPC_CAPC2012X135L45N | C7, C11, C13, C26, C32, C34, C36, C37 +4 |
| 2 | 1U | IPC_CAPC1608X90L35N | C14, C25 |
| 2 | 220N | IPC_CAPC1608X90L35N | C22, C23 |
| 1 | DNP | IPC_CAPC1608X90L35N | C39 |
| 11 | DNP | IPC_RESC1005X40L25N | R1, R3, R4, R5, R6, R7, R8, R9 +3 |
| 1 | DNI | IPC_RESC1608X55L25N | R2 |
| 2 | 33R | IPC_RESC1608X55L25N | R11, R12 |
| 1 | 2K2 | IPC_RESC1608X55L25N | R18 |
| 2 | DNI | IPC_RESC1005X40L25N | R19, R20 |
PortaPack H1 design files
The KiCad project lives in the arsscriptum/SmartMeter-ReverseEngineering repository on GitHub; these links point at the commit this page was built from.
PortaPack H1: common questions
How big is the PortaPack H1 PCB?
The PortaPack H1 measures 120 × 75 mm and is 1.6 mm thick.
How many components are on the PortaPack H1?
83 components, from 33 distinct parts. The full bill of materials is listed on this page.
Where can I download the PortaPack H1 design files?
From the arsscriptum/SmartMeter-ReverseEngineering repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the PortaPack H1 design in my own project?
The repository has no license, so all rights stay with arsscriptum. Use it as a reference, and ask the author before reusing the design.
Similar boards
Hat
pa3gsb
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Radioberry preamp
65 × 56 mm137 parts2LNo license675
Hermes-Lite Small IO Expansion
softerhardware
18.4 × 12.5 mm6 parts2LNo license372
Hermes-Lite Jumper With IO
21.9 × 51.7 mm12 parts2LNo license372
Hermes-Lite PureSignal Feedback
17.1 × 15.4 mm6 parts2LNo license372