7 open source boards using the CAT4004[_AB]
Real designs built with the CAT4004[_AB], from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Portapack havoc modified
jamesshao8
120 × 75 mm108 partsGPL-2.0186Portapack carnage
Acetolyne
120 × 75 mm108 partsGPL-2.046Havoc mayhem-177
zipper177
120 × 75 mm108 partsGPL-2.03Portapack havoc
emtee40
120 × 75 mm108 partsGPL-2.01Havoc
mksmiffy
120 × 75 mm108 partsGPL-2.01PortaPack H1
arsscriptum
120 × 75 mm83 partsNo license1PortaPack H1
Josephrp
120 × 75 mm108 partsCustom license12
How designs wire the CAT4004[_AB]
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the CAT4004[_AB] connects to, and the resistors, capacitors and other passives placed on it.
- Pin 7 has a resistor to GND on 7 of 7 designs, most often 3.9 kΩ.
- Pin 2 is tied to GND on 7 of 7 designs.
- Pin 8 is tied to 3.3V on 7 of 7 designs.
- Pin 8 has a decoupling capacitor on 7 of 7 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 2 | Connected to: GND 100% | — |
| Pin 7 | Connected to: Signal 100% |
|
| Pin 8 | Connected to: 3.3V 100% |
|
| Pin 9 | Connected to: GND 100% | — |
5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Portapack havoc modified by jamesshao8, Portapack carnage by Acetolyne, PortaPack H1 by Josephrp and Havoc mayhem-177 by zipper177.
The CAT4004[_AB] in open source designs
The gallery holds 7 open source boards using the CAT4004[_AB] from 7 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 108 components.
71% carry an open source license.
The most starred is Portapack havoc modified by jamesshao8.
Parts used alongside the CAT4004[_AB]
What boards using the CAT4004[_AB] are built for
CAT4004[_AB]: common questions
Where can I find a CAT4004[_AB] reference design?
Each of the 7 boards on this page is a real design using the CAT4004[_AB]. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the CAT4004[_AB] pin 7?
Pin 7 has a resistor to GND on 7 of 7 designs, most often 3.9 kΩ. Counted from the KiCad layouts of 7 open source designs using the CAT4004[_AB].
How is the CAT4004[_AB] pin 2 connected?
Pin 2 is tied to GND on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the CAT4004[_AB].
How is the CAT4004[_AB] pin 8 connected?
Pin 8 is tied to 3.3V on 7 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the CAT4004[_AB].
What parts are used alongside the CAT4004[_AB]?
The 5M40ZE64, AK4951EN, NUF4220MN, 74HC1G04GW and BQ24075RGT appear in the most repositories here.
How big is a typical board using the CAT4004[_AB]?
The median is 120 × 75 mm.
What is the most popular open source board using the CAT4004[_AB]?
By GitHub stars, Portapack havoc modified by jamesshao8, with 186 stars.
Can I simulate one of these boards using the CAT4004[_AB] before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.