7 open source boards using the AK4951EN

Real designs built with the AK4951EN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the AK4951EN

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the AK4951EN connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 4 has a series resistor on 7 of 7 designs, most often 2.2 kΩ.
  • Pin 8 has a resistor to GND on 7 of 7 designs, most often 10 kΩ.
  • Pin 18 has a series resistor on 7 of 7 designs, most often 1.5 kΩ (then 10 kΩ).
  • Pin 3 has a series capacitor on 7 of 7 designs.
Pin 3Connected to: Signal 100%
  • Series capacitor on 100%
Pin 4Connected to: Signal 100%
  • Series resistor on 100% · 2.2 kΩ (7)
Pin 8Connected to: Signal 100%
  • Resistor to GND on 100% · 10 kΩ (6)
Pin 9Connected to: A connector 100%
  • Ferrite bead on 86%
Pin 10Connected to: A connector 100%
  • Ferrite bead on 86%
Pin 16Connected to: 3.3V 100%
  • Decoupling capacitor on 100%
Pin 17Connected to: GND 100%
Pin 18Connected to: A connector 100%, BQ24075RGT 86%
  • Capacitor to GND on 100%
  • Series resistor on 100% · 1.5 kΩ (12), 10 kΩ (6)
Pin 21Connected to: 1.8V 100%
  • Decoupling capacitor on 100%
Pin 22Connected to: NUF4220MN 100%
  • Series capacitor on 100%
Pin 23Connected to: NUF4220MN 100%
  • Series capacitor on 100%
Pin 24Connected to: Signal 100%
  • Capacitor to GND on 100%
Pin 25Connected to: GND 100%
Pin 26Connected to: Signal 100%
  • Series capacitor on 100%
Pin 27Connected to: Signal 100%
  • Series capacitor on 100%
Pin 28Connected to: 3.3V 100%
  • Decoupling capacitor on 100%
Pin 29Connected to: GND 100%
Pin 30Connected to: Signal 100%
  • Capacitor to GND on 100%
Pin 31Connected to: Signal 100%
  • Capacitor to GND on 100%
Pin 33Connected to: GND 100%

13 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Portapack havoc modified by jamesshao8, Portapack carnage by Acetolyne, PortaPack H1 by Josephrp and Havoc mayhem-177 by zipper177.

The AK4951EN in open source designs

The gallery holds 7 open source boards using the AK4951EN from 7 GitHub repositories; a typical one measures about 120 × 75 mm and carries around 108 components.

71% carry an open source license.

The most starred is Portapack havoc modified by jamesshao8.

What boards using the AK4951EN are built for

AK4951EN: common questions

Where can I find a AK4951EN reference design?

Each of the 7 boards on this page is a real design using the AK4951EN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the AK4951EN pin 4?

Pin 4 has a series resistor on 7 of 7 designs, most often 2.2 kΩ. Counted from the KiCad layouts of 7 open source designs using the AK4951EN.

What resistor goes on the AK4951EN pin 8?

Pin 8 has a resistor to GND on 7 of 7 designs, most often 10 kΩ. Counted from the KiCad layouts of 7 open source designs using the AK4951EN.

What resistor goes on the AK4951EN pin 18?

Pin 18 has a series resistor on 7 of 7 designs, most often 1.5 kΩ (then 10 kΩ). Counted from the KiCad layouts of 7 open source designs using the AK4951EN.

What parts are used alongside the AK4951EN?

The 5M40ZE64, CAT4004[_AB], NUF4220MN, 74HC1G04GW and BQ24075RGT appear in the most repositories here.

How big is a typical board using the AK4951EN?

The median is 120 × 75 mm.

What is the most popular open source board using the AK4951EN?

By GitHub stars, Portapack havoc modified by jamesshao8, with 186 stars.

Can I simulate one of these boards using the AK4951EN before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part