HardLabs

SupaClock Carrier v1 - PCB 67x85mm

ArticunoFruna·SupaClock_IEE2463·hardware/SupaClock_Carrier_v4/SupaClock_SensorBoard/SupaClock_SensorBoard.kicad_pcb

SupaClock Carrier v1 - PCB 67x85mm layout, top view — open source ESP32 board by ArticunoFruna
Simulate this board

About the SupaClock Carrier v1 - PCB 67x85mm

SupaClock Carrier v1 - PCB 67x85mm is an open source ESP32 PCB design by ArticunoFruna, published on GitHub. It is a 2-layer board measuring 40 × 48 mm, with 20 components from 20 distinct parts.

Its main chip is the AD8232, from the ESP32 family. By type, the board carries 13 connectors, 3 capacitors, 2 switches, 1 IC and 1 resistor.

It belongs with the iot & wireless, wearables and sensors designs in this gallery.

From the project

Este es el repositorio dedicado al proyecto del wearable para Capstone 2026-1 G10

SupaClock es un sistema de salud inteligente usable (wearable) de pulsera desarrollado como parte del curso IEE2463. Su propósito es capturar biometría crítica en tiempo real, procesarla tanto en el dispositivo mediante técnicas de Inteligencia Artificial en el borde (TinyML), enviarla vía Bluetooth Low Energy (BLE) a una aplicación móvil de compañía y respaldarla de forma segura en la nube.

Main components on the SupaClock Carrier v1 - PCB 67x85mm

AD8232

SupaClock Carrier v1 - PCB 67x85mm bill of materials (BOM)

20 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AD8232
XIAO-ESP32-S3
U1
1
MAX30102_top
J3
1
MAX30205_8pad
J4
1
BMI160_7p
J5
1
MAX17048_L
J6a1
1
MAX17048_R
J6b1
1
MAX17048_BAT
J6c1
1
ST7789_1.69in
J7
1
AD8232_SparkFun
J11
1
ECG_LA_pad_M3
J12_LA1
1
ECG_RA_pad_M3
J12_RA1
1
ECG_RL_pad_M3
J12_RL1
1
AD8232_Pads_RA_LA_RL
J13
1
MAX30102_bot
J14
1
SELECT
SW1
1
NEXT
SW2
1
1NF
10uF
C2
1
10NF
100nF
C3
1
0.33UF
100nF
C6
1
360K
10k
R5

SupaClock Carrier v1 - PCB 67x85mm design files

The KiCad project lives in the ArticunoFruna/SupaClock_IEE2463 repository on GitHub; these links point at the commit this page was built from.

SupaClock Carrier v1 - PCB 67x85mm: common questions

What microcontroller does the SupaClock Carrier v1 - PCB 67x85mm use?

The SupaClock Carrier v1 - PCB 67x85mm is built around the AD8232, from the ESP32 family.

How big is the SupaClock Carrier v1 - PCB 67x85mm?

The SupaClock Carrier v1 - PCB 67x85mm measures 40 × 48 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the SupaClock Carrier v1 - PCB 67x85mm?

20 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SupaClock Carrier v1 - PCB 67x85mm design files?

From the ArticunoFruna/SupaClock_IEE2463 repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SupaClock Carrier v1 - PCB 67x85mm design in my own project?

The repository has no license, so all rights stay with ArticunoFruna. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SupaClock Carrier v1 - PCB 67x85mm without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in SupaClock_IEE2463

Similar boards