Ph sensor
About the Ph sensor PCB
Ph sensor is an open source PCB design by ARTS-Laboratory, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 52.1 × 29.2 mm, with 25 components from 10 distinct parts.
Other key parts include the Ph-port, PFKI, P2262, QR00C (TC) and AD31 (Ncp15). By type, the board carries 6 ICs, 5 capacitors and 1 diode.
It belongs with the sensors and power & battery designs in this gallery.
From the project
An in situ water quality sensor for monitoring water quality
Main components on the Ph sensor
Ph sensor bill of materials (BOM)
25 components, 10 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | Ph-port | pH_port | U1 |
| 1 | PFKI | PFKI | U2 |
| 1 | P2262 | P2262 | U3 |
| 1 | QR00C (TC) | PFKI | U4 |
| 1 | AD31 (Ncp15) | PFKI | U5 |
| 1 | DS3231M+ Rails https://www.digikey.com/en/products/detail/analog-devices-inc-maxim-integrated/DS3231M-TRL/2402421 | Rails | U6 |
| 2 | C | C_0603_1608Metric | 1.22nF1, 873.6uF1 |
| 11 | R | R_0603_1608Metric | 1k1, 1k2, 1k3, 1k4, 1k5, 4.7k1, 10k1, 100k1 +3 |
| 1 | LED | LED_0603_1608Metric | D1 |
| 5 | C | C_0603_1608Metric | C1, C2, C3, C4, C5 |
Ph sensor design files
The KiCad project lives in the ARTS-Laboratory/In-Situ-Water-Quality-Sensor repository on GitHub; these links point at the commit this page was built from.
Ph sensor: common questions
How big is the Ph sensor PCB?
The Ph sensor measures 52.1 × 29.2 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Ph sensor?
25 components, from 10 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Ph sensor design files?
From the ARTS-Laboratory/In-Situ-Water-Quality-Sensor repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Ph sensor design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which ARTS-Laboratory chose for the repository.
More boards in In-Situ-Water-Quality-Sensor
PCB V0.6.3
33 × 122.1 mm30 parts2LCC-BY-SA-4.02
AVR/ArduinoV0.5.0
32.6 × 97.2 mm15 parts2LCC-BY-SA-4.02
AVR/ArduinoV0.2 Rough Draft
32.6 × 97.2 mm15 parts2LCC-BY-SA-4.02
AVR/ArduinoV0.1
32.6 × 97.2 mm15 parts2LCC-BY-SA-4.02
AVR/ArduinoMainboard
41.9 × 55.9 mm12 parts2LCC-BY-SA-4.02
AVR/ArduinoWater sensor
48.3 × 101.6 mm12 parts2LCC-BY-SA-4.02
AVR/ArduinoWater sensor1
48.3 × 58.4 mm11 parts2LCC-BY-SA-4.02
AVR/ArduinoWater Quality Sensor
44 × 58.5 mm8 parts2LCC-BY-SA-4.02
Water sensor turbidty
39.4 × 12.7 mm5 parts2LCC-BY-SA-4.02
Similar boards
Sensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8k
Display Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7k
Microphone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2k
TemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1k
Module 16S PassiveBalanceAddOn
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k
ControllerCurrentShuntAddOn
26 × 16.9 mm9 parts2LCC-BY-NC-4.01.1k