HardLabs

PCB V0.6.3

ARTS-Laboratory·In-Situ-Water-Quality-Sensor·System_development/Jocassee/V0.6.0/EDA/V0.6.3/PCB V0.6.3.kicad_pcb

PCB V0.6.3 layout, top view — open source board by ARTS-Laboratory
Simulate this board

About the PCB V0.6.3

PCB V0.6.3 is an open source PCB design by ARTS-Laboratory, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 33 × 122.1 mm, with 30 components from 26 distinct parts.

Other key parts include the NRF24L01+PA+LNA, ProMicro, EZO_PH, EZO_TDS and DC-DC STPDN LM2596. By type, the board carries 8 ICs, 8 resistors, 7 connectors, 3 diodes, 2 capacitors and 1 module.

It belongs with the sensors, power & battery and rf & radio designs in this gallery, and the repository also holds 2 earlier revisions of it.

From the project

An in situ water quality sensor for monitoring water quality

PCB V0.6.3, from the project README
From the project README

Main components on the PCB V0.6.3

NRF24L01+PA+LNAProMicroEZO_PHEZO_TDSDC-DC STPDN LM2596DS3231M+BOB-12009, level shifterAMS1117 3.3v

PCB V0.6.3 bill of materials (BOM)

30 components, 26 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
NRF24L01+PA+LNA
U1
1
ProMicro
U2
1
EZO_PH
U3
1
EZO_TDS
U4
1
DC-DC STPDN LM2596
U5
1
DS3231M+
HX-2S-JH10
https://www.digikey.com/en/products/detail/analog-devices-inc-maxim-integrated/DS3231M-TRL/2402421
U6
1
BOB-12009, level shifter
U7
1
AMS1117 3.3v
U8
1
~
M8N_GPS1
1
2N2222A
Q1
1
TDS PRB
J1
1
Temp
J2
1
BAT
J3
1
TRBDT
J4
1
CHRG
J5
1
Conn_Coaxial_Small
J6
1
SD card socket
P1
1
D_Schottky
D1
2
LED
D2, D3
2
C_Polarized
C1, C2
Show 6 more
QtyPartRefs
1
1K
R1
1
4.7K
R2
1
470
R3
1
4.7K
R4
2
160
R5, R6
2
100K
R7, R8

PCB V0.6.3 design files

The KiCad project lives in the ARTS-Laboratory/In-Situ-Water-Quality-Sensor repository on GitHub; these links point at the commit this page was built from.

PCB V0.6.3: common questions

How big is the PCB V0.6.3?

The PCB V0.6.3 measures 33 × 122.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the PCB V0.6.3?

30 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the PCB V0.6.3 design files?

From the ARTS-Laboratory/In-Situ-Water-Quality-Sensor repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the PCB V0.6.3 design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which ARTS-Laboratory chose for the repository.

More boards in In-Situ-Water-Quality-Sensor

Earlier revisions in the repo: PCB V0.6.2, PCB V0.6.0

Similar boards