Connect4

arvindsa·connect4-pcb

Connect4 PCB layout, top view — open source ESP32 board by arvindsa

About the Connect4 PCB

Connect4 is an open source ESP32 PCB design by arvindsa, published on GitHub. It is a 2-layer board measuring 190 × 215 mm, with 141 components from 22 distinct parts.

Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the MCP73831 and AMS1117-3.3. By type, the board carries 50 diodes, 49 transformers, 16 capacitors, 12 resistors, 6 ICs and 5 switches.

It belongs with the displays & leds designs in this gallery.

From the project

This repository contains the KiCad design files for the custom PCB powering the On-The-Go Connect4 and Pixel Art Frame. This project integrates a display, buttons, and an ESP32 into a compact, portable device.

This repository contains the KiCad design files for the custom PCB powering the On-The-Go Connect4 and Pixel Art Frame. This project integrates a display, buttons, and an ESP32 into a compact, portable device.

🔗 Project Page: View on Hackster.io 👤 Author Profile: Arvind S.A. on Hackster.io

The hardware is designed using KiCad and includes:

- ESP32 microcontroller - OLED/LED matrix display interface - User input buttons - USB charging and power circuitry - Minimal, portable form factor

Main components on the Connect4

Connect4 bill of materials (BOM)

141 components, 22 distinct parts.

QtyPartRefs
1
ESP32-WROOM-32
U1
2
~
U2, U4
1
MCP73831
U3
1
~
U5
1
AMS1117-3.3
U6
1
Conn_01x06
J1
1
USB_C
J2
1
JST PH 2mm
J3
2
SW_Push
SW1, SW2
3
SW_Omron_B3FS
SW3, SW4, SW5
49
~
T1, T2, T3, T4, T5, T6, T7, T8 +41
1
Red
D1
49
WS2812B-2020
D2, D3, D4, D5, D6, D7, D8, D9 +41
2
10u
C1, C2
2
4.7uF
C3, C4
3
1u
C5, C8, C9
9
100n
C6, C7, C10, C11, C12, C13, C14, C15 +1
7
4K7
R1, R4, R5, R8, R9, R10, R11
1
2K
R2
1
470E
R3
Show 2 more
QtyPartRefs
2
5.1K
R6, R7
1
300R
R19

Connect4 design files

The KiCad project lives in the arvindsa/connect4-pcb repository on GitHub; these links point at the commit this page was built from.

Connect4: common questions

What microcontroller does the Connect4 use?

The Connect4 is built around the ESP32-WROOM-32, from the ESP32 family.

How big is the Connect4 PCB?

The Connect4 measures 190 × 215 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Connect4?

141 components, from 22 distinct parts. The full bill of materials is listed on this page.

Where can I download the Connect4 design files?

From the arvindsa/connect4-pcb repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Connect4 design in my own project?

The repository has no license, so all rights stay with arvindsa. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Connect4 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards