Offplay
aryan-madan·Offplay·PCB/Music Player.kicad_pcb
About the Offplay PCB
Offplay is an open source ESP32 PCB design by aryan-madan, published on GitHub under the AGPL-3.0 license. It is a 2-layer board measuring 100 × 60.6 mm, with 34 components from 20 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the TP4056, PCM5102A and AP2112K-3.3. By type, the board carries 9 capacitors, 9 resistors, 6 switches, 4 ICs, 4 connectors and 1 transistor.
It belongs with the iot & wireless designs in this gallery.
From the project
ESP-32 Bluetooth music player
Main components on the Offplay
Offplay bill of materials (BOM)
34 components, 20 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TP4056 | SOP-8-1EP_4.57x4.57mm_P1.27mm_EP4.57x4.45mm | U1 |
| 1 | PCM5102A | TSSOP-20_4.4x6.5mm_P0.65mm | U2 |
| 1 | AP2112K-3.3 | SOT-23-5 | U3 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U4 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | AudioJack3 | Jack_3.5mm_PJ320E_Horizontal | J1 |
| 1 | Conn_01x08 | JST_PH_S8B-PH-K_1x08_P2.00mm_Horizontal | J2 |
| 1 | USB_C_Receptacle_USB2.0_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J3 |
| 1 | SD_Card_Device | microSD_HC_Molex_47219-2001 | J4 |
| 1 | Conn_01x02 | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | LIPO1 |
| 3 | SW_Push | SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3 |
| 1 | RotaryEncoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW4 |
| 2 | SW_Push | SW_PUSH_1P1T_6x3.5mm_H4.3_APEM_MJTP1243 | SW5, SW6 |
| 5 | 100nF | C_0805_2012Metric | C1, C2, C3, C4, C9 |
| 2 | 100u | C_0805_2012Metric | C5, C6 |
| 1 | 1µF | C_0805_2012Metric | C7 |
| 1 | 10u | C_0805_2012Metric | C8 |
| 1 | 1.2k | R_0805_2012Metric | R1 |
| 6 | 10k | R_0805_2012Metric | R2, R3, R4, R7, R8, R9 |
| 2 | 5.1k | R_0805_2012Metric | R5, R6 |
Offplay design files
The KiCad project lives in the aryan-madan/Offplay repository on GitHub; these links point at the commit this page was built from.
- LayoutPCB/Music Player.kicad_pcb
- SchematicPCB/Music Player.kicad_sch
Offplay: common questions
What microcontroller does the Offplay use?
The Offplay is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Offplay PCB?
The Offplay measures 100 × 60.6 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Offplay?
34 components, from 20 distinct parts. The full bill of materials is listed on this page.
Where can I download the Offplay design files?
From the aryan-madan/Offplay repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Offplay design in my own project?
Yes, under the terms of its AGPL-3.0 license, which aryan-madan chose for the repository.
Can I test firmware for the Offplay without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k