EM Harpsichord
aschmidt99·EM_Harpsichord·Electronics/EMHarpsichord_Sustainer+Playback/EMHarpsichord_Sustainer+Playback.kicad_pcb
About the EM Harpsichord PCB
EM Harpsichord is an open source PCB design by aschmidt99, published on GitHub. It is a 2-layer board measuring 61.2 × 27.4 mm, with 47 components from 29 distinct parts.
Other key parts include the ITR20403, NE5532 and PAM8406D. By type, the board carries 18 capacitors, 11 resistors, 5 test points, 4 inductors, 3 ICs and 3 connectors.
It belongs with the audio and sensors designs in this gallery.
From the project
A repo for cad, code, and electronics related to EM Harpsichord
The EM Harpsichord is an augmented harpsichord that uses optical sensors, audio power amplifier chips, and some simple signal processing to sustain the vibrations of its brass strings. This early prototype uses one circuit board for every string you wish to sustain. A work-in-progress performance/demonstration was given on October 2nd, 2023 at the 63rd Annual University of Michigan Organ Conference. For this demonstration, 3 strings had optical sustaining enabled and 8 strings had audio-playback enabled.

Main components on the EM Harpsichord
EM Harpsichord bill of materials (BOM)
47 components, 29 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ITR20403 | Everlight_ITR20403 | U1 |
| 1 | NE5532 | SOP-8_3.76x4.96mm_P1.27mm | U2 |
| 1 | PAM8406D | SOP-16_3.9x9.9mm_P1.27mm | U3 |
| 1 | CONN_01X03_MALE Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | CONN_01X04_MALE Conn_01x04_Male | PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | CONN_01X03_MALE Conn_01x03_Male | JST_XH_B3B-XH-A_1x03_P2.50mm_Vertical | J3 |
| 1 | 100K 100k | Potentiometer_Bourns_3224J_Horizontal | RV1 |
| 1 | 20K 20k | Potentiometer_Bourns_3224J_Horizontal | RV2 |
| 1 | 100K 20k | Potentiometer_Bourns_3224J_Horizontal | RV3 |
| 1 | PT_out | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP1 |
| 1 | aux_in | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP2 |
| 1 | gain_out | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP3 |
| 1 | opt_out | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP4 |
| 1 | MountingHole | TestPoint_THTPad_D2.0mm_Drill1.0mm | TP6 |
| 4 | 5A/120OHM 5A/120Ohm | C_0805_2012Metric | FB1, FB2, FB3, FB4 |
| 1 | 100N 100n | C_0603_1608Metric | C1 |
| 2 | 2.2U 2.2u | C_0603_1608Metric | C2, C5 |
| 1 | 22N 22n | C_0603_1608Metric | C3 |
| 1 | 47P 47p | C_0603_1608Metric | C4 |
| 1 | 220U 220u | C_Elec_6.3x5.8 | C6 |
Show 9 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | 1u | C_0603_1608Metric | C7, C8, C9, C10, C11, C13 |
| 2 | 10U 10u | C_0805_2012Metric | C12, C14 |
| 4 | 220P 220p | C_0603_1608Metric | C15, C16, C17, C18 |
| 1 | 220 | R_0603_1608Metric | R1 |
| 6 | 10K 10k | R_0603_1608Metric | R2, R3, R5, R8, R9, R10 |
| 1 | 20K 20k | R_0603_1608Metric | R4 |
| 1 | 1k | R_0603_1608Metric | R6 |
| 1 | 100K 100k | R_0603_1608Metric | R7 |
| 1 | 0 | R_0603_1608Metric | R11 |
EM Harpsichord design files
The KiCad project lives in the aschmidt99/EM_Harpsichord repository on GitHub; these links point at the commit this page was built from.
- LayoutElectronics/EMHarpsichord_Sustainer+Playback/EMHarpsichord_Sustainer+Playback.kicad_pcb
- SchematicElectronics/EMHarpsichord_Sustainer+Playback/EMHarpsichord_Sustainer+Playback.kicad_sch
- BOMElectronics/EMHarpsichord_Sustainer+Playback/jlcpcb_Sep21_2023/production_files/BOM-EMHarpsichord_Sustainer+Playback.csv
EM Harpsichord: common questions
How big is the EM Harpsichord PCB?
The EM Harpsichord measures 61.2 × 27.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the EM Harpsichord?
47 components, from 29 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the EM Harpsichord design files?
From the aschmidt99/EM_Harpsichord repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the EM Harpsichord design in my own project?
The repository has no license, so all rights stay with aschmidt99. Use it as a reference, and ask the author before reusing the design.
Similar boards
Sensor smd
scottbez1
40 × 20 mm5 parts2LApache-2.04.2kSensors
StuckAtPrototype
15.2 × 9 mm14 parts4LApache-2.03.8kMicrophone
Mentra-Community
5.5 × 6.1 mm6 parts2LMIT1.2kKLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kPots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956