Garage-Door-Opener

AshiqAshref·Garage-Door-Opener·Garage Door Opener Circuit/GarageOpener.kicad_pcb

Garage-Door-Opener PCB layout, top view — open source ESP32 board by AshiqAshref

About the Garage-Door-Opener PCB

Garage-Door-Opener is an open source ESP32 PCB design by AshiqAshref, published on GitHub under the MIT license. It is a 2-layer board measuring 94.1 × 63.5 mm, with 41 components from 27 distinct parts.

Its main chip is the ESP32-C3-MINI-1U-N4, from the ESP32 family. Other key parts include the AMS1117-3.3 and AP63205WU. By type, the board carries 17 capacitors, 6 diodes, 5 resistors, 4 connectors, 3 ICs and 3 switches.

It belongs with the iot & wireless, displays & leds and power & battery designs in this gallery.

From the project

Universal Garage Door using BLE (Bluetooth Low Power) running on ESP32 with highest security possible.

A complete IoT garage door opener system featuring secure Bluetooth Low Energy (BLE) communication, ESP32-C3 microcontroller, custom PCB design, and Android mobile application.

This project implements a modern, secure garage door opener that can be controlled via a smartphone app. The system features:

- Secure BLE Communication: Encrypted pairing and authentication - ESP32-C3 Based Controller: Low-power WiFi/BLE microcontroller - Custom PCB Design: Professional circuit board with integrated power management - Android Mobile App: Modern Material Design 3 interface - Visual Feedback: 8-digit…

Main components on the Garage-Door-Opener

Garage-Door-Opener bill of materials (BOM)

41 components, 27 distinct parts.

QtyPartRefs
1
AMS1117-3.3
U2
1
AP63205WU
U3
1
ESP32-C3-MINI-1U-N4
U4
1
MMBT3904
Q1
1
USB_B_Micro
J2
1
DISP_OUT
J4
2
TB002-500-02BE
J5, J6
1
SRD-05VDC-SL-C
K1
2
PTS526_SMG15_SMTR2_LFS
S1, S2
1
SW_Push
SW1
1
PWRLED
D5
1
1N4148W
D6
3
LESD5D5.0CT1G
D7, D8, D9
1
1N5819HW-7-F
D10
1
4.7u 1.5A - 2A
L1
1
0.1uF/50V 10%
C1
2
22pF/50V(5%)
C2, C6
3
0.1uF/16V 10%
C3, C7, C9
2
0.1uF/16V 10%
C4, C10
3
10uf tant(0.2-10R esr)
C5, C8, C12
Show 7 more
QtyPartRefs
2
10uf/50V
C11, C15
1
22uf
C13
2
22uf/16V
C14, C16
1
47uf
C17
1
3.3k
R1
3
10k
R2, R4, R5
1
75
R3

Garage-Door-Opener design files

The KiCad project lives in the AshiqAshref/Garage-Door-Opener repository on GitHub; these links point at the commit this page was built from.

Garage-Door-Opener: common questions

What microcontroller does the Garage-Door-Opener use?

The Garage-Door-Opener is built around the ESP32-C3-MINI-1U-N4, from the ESP32 family.

How big is the Garage-Door-Opener PCB?

The Garage-Door-Opener measures 94.1 × 63.5 mm, has 2 copper layers and is 1.600198 mm thick.

How many components are on the Garage-Door-Opener?

41 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the Garage-Door-Opener design files?

From the AshiqAshref/Garage-Door-Opener repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Garage-Door-Opener design in my own project?

Yes, under the terms of its MIT license, which AshiqAshref chose for the repository.

Can I test firmware for the Garage-Door-Opener without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards