5 open source boards using the ESP32-C3-MINI-1U-N4

Real designs built with the ESP32-C3-MINI-1U-N4, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

5 boardsClear filters|Most starred

How designs wire the ESP32-C3-MINI-1U-N4

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ESP32-C3-MINI-1U-N4 connects to, and the resistors, capacitors and other passives placed on it.

  • The EN pin has a pull-up to 3.3V on 4 of 5 designs, most often 10 kΩ (then 1 MΩ).
  • The IO3 pin is left unconnected on 4 of 5 designs.
  • The IO1 pin is left unconnected on 4 of 5 designs.
  • The EN pin has a capacitor to GND on 3 of 5 designs, most often 1 µF (then 100 nF).
GNDpin 1, 2, 11, 14, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49_1, 49_2, 49_3, 49_4, 49_5, 49_6, 49_7, 49_8, 49_9, 50, 51, 52, 53Connected to: GND 100%
3V3pin 3Connected to: 3.3V 60% · a signal 40%
NCpin 4, 7, 9, 10, 15, 17, 24, 25, 28, 29, 32, 33, 34, 35Connected to: Not connected 100%
IO2pin 5Connected to: Not connected 60% · a signal 40%
  • Pull-up to 3.3V on 40% · 10 kΩ (2)
IO3pin 6Connected to: Not connected 80% · a signal 20%
ENpin 8Connected to: Signal 80% · not connected 20%
  • Pull-up to 3.3V on 80% · 10 kΩ (3), 1 MΩ (1)
  • Capacitor to GND on 60% · 1 µF (2), 100 nF (1)
IO0pin 12Connected to: Not connected 60% · a signal 40%
  • Resistor to GND on 40% · 220 kΩ (2)
  • Capacitor to GND on 40% · 100 nF (2)
  • Pull-up to BATT+ on 40% · 220 kΩ (2)
IO1pin 13Connected to: Not connected 80% · a signal 20%
IO10pin 16Connected to: Signal 60% · not connected 40%
  • Series resistor on 40% · 3.3 kΩ (1), 33 kΩ (1)
IO5pin 19Connected to: Signal 60% · not connected 40%
  • Pull-up to 3.3V on 40% · 10 kΩ (1), 100 kΩ (1)
IO6pin 20Connected to: Not connected 60% · a signal 40%
IO7pin 21Connected to: Not connected 60% · a signal 40%
IO8pin 22Connected to: Not connected 60% · a signal 40%
  • Pull-up to 3.3V on 40% · 10 kΩ (2)
  • Series resistor on 40% · 100 Ω (2)
IO9pin 23Connected to: Signal 80% · not connected 20%
  • Pull-up to 3.3V on 40% · 10 kΩ (1), 1 MΩ (1)
IO18pin 26Connected to: Signal 80% · not connected 20%
  • Series resistor on 60% · 27 Ω (2), 470 Ω (1)
IO19pin 27Connected to: Signal 80% · not connected 20%
  • Series resistor on 60% · 27 Ω (2), 100 MΩ (1)
GND_49pin 49Connected to: GND 100%

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include F8-fc h7 rev by victorhook, LSwarm-Anchor by DerpyDoggo11, LSwarm-Drone-Launcher by DerpyDoggo11 and Garage-Door-Opener by AshiqAshref.

The ESP32-C3-MINI-1U-N4 in open source designs

The gallery holds 5 open source boards using the ESP32-C3-MINI-1U-N4 from 5 GitHub repositories; a typical one measures about 65 × 31 mm and carries around 51 components.

60% use four copper layers or more, and 20% carry an open source license.

The most starred is F8-fc h7 rev by victorhook.

Parts used alongside the ESP32-C3-MINI-1U-N4

Microcontrollers on boards using the ESP32-C3-MINI-1U-N4

What boards using the ESP32-C3-MINI-1U-N4 are built for

ESP32-C3-MINI-1U-N4: common questions

Where can I find a ESP32-C3-MINI-1U-N4 reference design?

Each of the 5 boards on this page is a real design using the ESP32-C3-MINI-1U-N4. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the ESP32-C3-MINI-1U-N4 EN pin?

The EN pin has a pull-up to 3.3V on 4 of 5 designs, most often 10 kΩ (then 1 MΩ). Counted from the KiCad layouts of 5 open source designs using the ESP32-C3-MINI-1U-N4.

How is the ESP32-C3-MINI-1U-N4 IO3 pin connected?

The IO3 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-C3-MINI-1U-N4.

How is the ESP32-C3-MINI-1U-N4 IO1 pin connected?

The IO1 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the ESP32-C3-MINI-1U-N4.

What parts are used alongside the ESP32-C3-MINI-1U-N4?

The AP2112K-3.3, BQ24075RGTR and DW03C appear in the most repositories here.

Which microcontrollers do boards using the ESP32-C3-MINI-1U-N4 use?

Most are built on ESP32 (5).

How big is a typical board using the ESP32-C3-MINI-1U-N4?

The median is 65 × 31 mm, and 40% are two-layer designs.

What is the most popular open source board using the ESP32-C3-MINI-1U-N4?

By GitHub stars, F8-fc h7 rev by victorhook, with 6 stars.

Can I simulate one of these boards using the ESP32-C3-MINI-1U-N4 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part