22 open source boards using the ATSAMD21G18A-A
Real designs built with the ATSAMD21G18A-A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
Elrocket
broskicodes
36 × 64 mm80 parts4LNo license46Microchip SAM
StratoSoar-MK3.0
crnicholson
36.6 × 60.3 mm76 parts4LNo license42Microchip SAM
StratoSoar-MK2.2
crnicholson
42 × 84 mm107 parts4LNo license24Microchip SAM
Pawpet
NanoCodeBug
51.8 × 51.8 mm34 parts2LCC-BY-NC-4.020Microchip SAM
Mechaduino-Hardware
IDMIL
43 × 43 mm61 parts2LNo license3Microchip SAM
Study
LukeAndreesen
46.3 × 75 mm73 parts2LNo license1Microchip SAM
TouchBoard
8-Lambda-8
132.9 × 130 mm277 parts2LGPL-3.00Microchip SAM
Breakout board v4
asinghani
81.3 × 73.9 mm91 parts4LNo license0Microchip SAM
Neodrone v1
dulatello08
100 × 89 mm75 parts4LNo license0Microchip SAM
Topaz
dfedor2008
30.5 × 72.9 mm56 parts4LNo license0Microchip SAM
Bicep
albachten
70 × 85 mm55 parts4LCC0-1.00Microchip SAM
MoodLogger v1
sullyjason
30 × 30 mm48 parts2LNo license0ESP32
Calender
hardwarepro
94 × 27.5 mm44 parts2LNo license0Microchip SAM
FLWSB-SAMDaaNo21
DaanDekoningKrekels
85.7 × 21 mm32 parts4LNo license0Microchip SAM
Cloneduino zero
eepj
50 × 19.7 mm28 parts4LNo license0Microchip SAM
SamdFlightController
crnicholson
42 × 87.9 mm106 parts4LNo license24Microchip SAM
Gs
Horizon-Avionics
76 × 35 mm37 parts2LNo license17Microchip SAM
Back
ayukmr
26.5 × 26.5 mm59 parts4LMIT1Microchip SAM
Neodrone v1-noreturn
dulatello08
100 × 89 mm75 parts4LNo license0Microchip SAM
Esclave OYA M0
bpmine
78.6 × 30 mm58 parts2LNo license0Microchip SAM
Debugger board v1
asinghani
81.3 × 43.2 mm53 parts4LNo license0Microchip SAM
StratoSoar-MK2.1
crnicholson
42 × 87.9 mm104 parts4LNo license24
How designs wire the ATSAMD21G18A-A
Read from the KiCad layouts of 18 open source designs, one per repository: what each pin of the ATSAMD21G18A-A connects to, and the resistors, capacitors and other passives placed on it.
- The VDDCORE pin has a capacitor to GND on 17 of 18 designs, most often 1 µF (then 100 nF).
- The VDDANA pin has a decoupling capacitor on 15 of 18 designs, most often 100 nF (then 10 µF).
- The VDDIO pins have a decoupling capacitor on 14 of 18 designs, most often 100 nF (then 1 µF).
- The VDDIN pin has a decoupling capacitor on 14 of 18 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PA00pin 1 | Connected to: Signal 61% · not connected 33% |
|
| PA01pin 2 | Connected to: Not connected 56% · a signal 44% |
|
| PA03pin 4 | Connected to: Not connected 61% · a signal 39% | — |
| GNDANApin 5 | Connected to: GND 83% · a signal 17% | — |
| VDDANApin 6 | Connected to: 3.3V 67% · a signal 28% |
|
| VDDIOpin 17, 36 | Connected to: 3.3V 81% |
|
| GNDpin 18, 35, 42 | Connected to: GND 96% | — |
| PA22pin 31 | Connected to: A connector 56% |
|
| PA23pin 32 | Connected to: A connector 56% |
|
| PB22pin 37 | Connected to: Not connected 72% · a signal 28% | — |
| PB23pin 38 | Connected to: Not connected 83% · a signal 17% | — |
| PA27pin 39 | Connected to: Not connected 78% · a signal 22% | — |
| RESETpin 40 | Connected to: A connector 67% |
|
| PA28pin 41 | Connected to: Not connected 83% · a signal 17% | — |
| VDDCOREpin 43 | Connected to: Signal 78% · VDDCORE 17% |
|
| VDDINpin 44 | Connected to: 3.3V 83% |
|
| PB03pin 48 | Connected to: Not connected 67% · a signal 28% | — |
28 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Elrocket by broskicodes, StratoSoar-MK3.0 by crnicholson, SamdFlightController by crnicholson and Pawpet by NanoCodeBug.
The ATSAMD21G18A-A in open source designs
The gallery holds 22 open source boards using the ATSAMD21G18A-A from 18 GitHub repositories; a typical one measures about 50.9 × 62.2 mm and carries around 60 components.
64% use four copper layers or more, and 14% carry an open source license.
The most starred is Elrocket by broskicodes.
Parts used alongside the ATSAMD21G18A-A
Microcontrollers on boards using the ATSAMD21G18A-A
What boards using the ATSAMD21G18A-A are built for
ATSAMD21G18A-A: common questions
Where can I find a ATSAMD21G18A-A reference design?
Each of the 22 boards on this page is a real design using the ATSAMD21G18A-A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ATSAMD21G18A-A VDDCORE pin connected?
The VDDCORE pin has a capacitor to GND on 17 of 18 designs, most often 1 µF (then 100 nF). Counted from the KiCad layouts of 18 open source designs using the ATSAMD21G18A-A.
What decoupling capacitors do designs use on the ATSAMD21G18A-A VDDANA pin?
The VDDANA pin has a decoupling capacitor on 15 of 18 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 18 open source designs using the ATSAMD21G18A-A.
What decoupling capacitors do designs use on the ATSAMD21G18A-A VDDIO pin?
The VDDIO pins have a decoupling capacitor on 14 of 18 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 18 open source designs using the ATSAMD21G18A-A.
What parts are used alongside the ATSAMD21G18A-A?
The AMS1117-3.3, ATGM336H, BME280, PE4259 and SX1262IMLTRT appear in the most repositories here.
Which microcontrollers do boards using the ATSAMD21G18A-A use?
Most are built on Microchip SAM (20), ESP32 (1) and STM32 (1).
How big is a typical board using the ATSAMD21G18A-A?
The median is 50.9 × 62.2 mm, and 36% are two-layer designs.
What is the most popular open source board using the ATSAMD21G18A-A?
By GitHub stars, Elrocket by broskicodes, with 46 stars.
Can I simulate one of these boards using the ATSAMD21G18A-A before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.