Procyon hw
athanniss·procyon-hw
About the Procyon hw PCB
Procyon hw is an open source PCB design by athanniss, published on GitHub. It is a 4-layer board measuring 74.8 × 56.8 mm, with 86 components from 35 distinct parts.
Other key parts include the TSV732IS, 74LVC1G17, NUCLEO144-H743ZI, INA240A2D and BTT TMC2209 V1.3. By type, the board carries 26 resistors, 25 capacitors, 14 test points, 9 ICs, 6 connectors and 3 LEDs.
It belongs with the robotics & motion designs in this gallery.
From the project
Procyon is a shield that plugs onto an STM32 Nucleo-H743ZI and turns it into a bench instrument for driving and measuring coils: a PWM-switched N-FET stage with high- and low-side current sensing, a stepper driver, a thermocouple input and a small OLED.
Procyon is a shield that plugs onto an STM32 Nucleo-H743ZI and turns it into a bench instrument for driving and measuring coils: a PWM-switched N-FET stage with high- and low-side current sensing, a stepper driver, a thermocouple input and a small OLED.
- ⚡ procyon-hw: this repo, the KiCad schematic, PCB and fab outputs - 🧠 procyon-stm32h7: firmware for the Nucleo-H743ZI - 🖥️ ProcyonCpp: host application, talks to the board over the Lucid protocol

Main components on the Procyon hw
Procyon hw bill of materials (BOM)
86 components, 35 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | TSV732IS | MSOP-8_3x3mm_P0.65mm | U1 |
| 1 | 74LVC1G17 | SOT-23-5 | U2 |
| 1 | NUCLEO144-H743ZI | ST_Zio_Only_Connectors_144_STLink | U4 |
| 2 | INA240A2D | SOIC-8_3.9x4.9mm_P1.27mm | U6, U11 |
| 1 | BTT TMC2209 V1.3 | BTT-TMC2209-V1.3_RAISED | U7 |
| 1 | ER_OLEDM0.91_1X-I2C ER_OLEDM0.91_1x-I2C | ER_OLEDM0.91_1x-I2C | U8 |
| 1 | MCP96XX01X-X-MX MCP96xx01x-x-MX | QFN-20-1EP_5x5mm_P0.65mm_EP3.35x3.35mm | U9 |
| 1 | MCP1501-33XSN MCP1501-33xSN | SOIC-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | DMTH10H009LPSQ-13 | Diodes_PowerDI5060-8_ThermalVias | Q1 |
| 2 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J1, J3 |
| 1 | CONN_01X02 Conn_01x02 | JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J2 |
| 2 | CONN_01X04 Conn_01x04 | JST_PH_S4B-PH-K_1x04_P2.00mm_Horizontal | J4, J5 |
| 1 | CONN_01X03 Conn_01x03 | JST_PH_S3B-PH-K_1x03_P2.00mm_Horizontal | J6 |
| 14 | TestPoint | PinHeader_1x01_P2.54mm_Vertical | TP1, TP2, TP3, TP4, TP5, TP8, TP9, TP10 +6 |
| 3 | ORANGE | LED_0805_2012Metric | LED5, LED6, LED7 |
| 1 | STPST5H100AFY | D_SOD-128 | D1 |
| 1 | Ferrite_Bead | Ferrite_0603_1608Metric | FB1 |
| 3 | 10N 10n | C_0603_1608Metric | C1, C5, C27 |
| 15 | 100N 100n | C_0603_1608Metric | C2, C3, C4, C7, C11, C12, C13, C15 +7 |
| 3 | 10U 10u | C_0805_2012Metric | C14, C16, C29 |
Show 15 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1n | C_0603_1608Metric | C18 |
| 1 | ~ | C_0603_1608Metric | C21 |
| 1 | 100 uF | C_Elec_6.3x5.8 | C22 |
| 1 | u1 | C_0603_1608Metric | C26 |
| 4 | 47K 47k | R_0603_1608Metric | R1, R4, R8, R10 |
| 2 | 4K7 4k7 | R_0603_1608Metric | R2, R11 |
| 6 | 220R | R_0603_1608Metric | R3, R5, R12, R13, R20, R22 |
| 1 | 100R | R_0603_1608Metric | R6 |
| 1 | ~ | R_0805_2012Metric | R7 |
| 2 | 0.015R | R_1206_3216Metric | R9, R21 |
| 2 | 1k | R_0603_1608Metric | R23, R36 |
| 3 | 560R | R_0603_1608Metric | R29, R30, R31 |
| 2 | 270R | R_0603_1608Metric | R32, R33 |
| 1 | 10K 10k | R_0603_1608Metric | R37 |
| 2 | ~ | R_0603_1608Metric | R38, R39 |
Procyon hw design files
The KiCad project lives in the athanniss/procyon-hw repository on GitHub; these links point at the commit this page was built from.
- Layoutbj-magistrska.kicad_pcb
- Schematicbj-magistrska.kicad_sch
- BOMproduction/BJ_TEST_bom.csv
Procyon hw: common questions
How big is the Procyon hw PCB?
The Procyon hw measures 74.8 × 56.8 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Procyon hw?
86 components, from 35 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Procyon hw design files?
From the athanniss/procyon-hw repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Procyon hw design in my own project?
The repository has no license, so all rights stay with athanniss. Use it as a reference, and ask the author before reusing the design.
Similar boards
Stack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kCube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1kTrollerv2
rene-dev
100 × 75 mm33 parts4LGPL-3.0979Powerstep
rene-dev
95.2 × 71.5 mm28 parts4LGPL-3.097911ua
rene-dev
57.3 × 19 mm26 parts2LGPL-3.0979Diff driver
rene-dev
32 × 22 mm14 parts2LGPL-3.0979