3 open source boards using the INA240A2D
Real designs built with the INA240A2D, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32P1 tx
Deco025
82 × 60 mm88 parts4LCERN-OHL-S-2.04
Actuator
ANGELOREYES-afk
37.4 × 54.4 mm20 parts2LNo license1
P1 rx
75 × 60 mm86 parts4LCERN-OHL-S-2.04
The INA240A2D in open source designs
The gallery holds 3 open source boards using the INA240A2D from 2 GitHub repositories; a typical one measures about 75 × 60 mm and carries around 86 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is P1 tx by Deco025.
Microcontrollers on boards using the INA240A2D
What boards using the INA240A2D are built for
INA240A2D: common questions
Where can I find a INA240A2D reference design?
Each of the 3 boards on this page is a real design using the INA240A2D. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the INA240A2D use?
Most are built on STM32 (1).
How big is a typical board using the INA240A2D?
The median is 75 × 60 mm, and 33% are two-layer designs.
What is the most popular open source board using the INA240A2D?
By GitHub stars, P1 tx by Deco025, with 4 stars.
Can I simulate one of these boards using the INA240A2D before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.