5 open source boards using the NUCLEO144-H743ZI
Real designs built with the NUCLEO144-H743ZI, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Motherboard
morzack
125 × 85 mm194 parts4LNo license1Mic test
jbrryhooves
100 × 100 mm307 parts4LNo license0CoreLight
llextv
170.7 × 119 mm192 parts4LNo license0CabShield
Avery-Jutkowitz
200 × 150 mm141 parts4LNo license0Procyon hw
athanniss
74.8 × 56.8 mm86 parts4LNo license0
How designs wire the NUCLEO144-H743ZI
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the NUCLEO144-H743ZI connects to, and the resistors, capacitors and other passives placed on it.
- The IOREF pin is left unconnected on 4 of 4 designs.
- The +5V pin is left unconnected on 4 of 4 designs.
- The PG13/ETH_TXD0 pin is left unconnected on 4 of 4 designs.
- The ETH_RXD1/PC5 pin is left unconnected on 4 of 4 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| PC12pin 3 | Connected to: Not connected 75% · a signal 25% | — |
| PD2pin 4 | Connected to: Not connected 75% · a signal 25% | — |
| VDDpin 5 | Connected to: Not connected 75% · 3.3V 25% | — |
| E5Vpin 6 | Connected to: Not connected 75% · 5V 25% | — |
| BOOT0pin 7 | Connected to: Not connected 75% · a signal 25% | — |
| GNDpin 8, 19, 20, 22, 49, 60, 71, 72, 81, 92, 111, 126, 135, 143, 144 | Connected to: GND 100% | — |
| NCpin 10, 26, 67 | Connected to: Not connected 100% | — |
| IOREFpin 12 | Connected to: Not connected 100% | — |
| TMS/PA13pin 13 | Connected to: Not connected 75% · a signal 25% | — |
| RSTpin 14 | Connected to: Not connected 75% · a signal 25% | — |
| TCK/PA14pin 15 | Connected to: Not connected 75% · a signal 25% | — |
| +3V3pin 16 | Connected to: Not connected 75% · 3.3V 25% | — |
| PA15pin 17 | Connected to: Not connected 75% · a signal 25% | — |
| +5Vpin 18 | Connected to: Not connected 100% | — |
| LD2/PB7pin 21 | Connected to: Not connected 75% · a signal 25% | — |
| VINpin 24 | Connected to: Not connected 75% · a signal 25% | — |
| RTC_CRYSTAL/PC14pin 25 | Connected to: Not connected 75% · a signal 25% | — |
| RTC_CRYSTAL/PC15pin 27 | Connected to: Not connected 75% · a signal 25% | — |
| PH0pin 29 | Connected to: Not connected 75% · a signal 25% | — |
| PH1pin 31 | Connected to: Not connected 75% · a signal 25% | — |
| PB0pin 34 | Connected to: Not connected 75% · a signal 25% | — |
| PC2pin 35 | Connected to: Not connected 75% · a signal 25% | — |
| ETH_MDC/PC1pin 36 | Connected to: Not connected 75% · a signal 25% | — |
| PC3pin 37 | Connected to: Not connected 75% · a signal 25% | — |
| PD4pin 39 | Connected to: Not connected 75% · a signal 25% | — |
| PD3pin 40 | Connected to: Not connected 75% · a signal 25% | — |
| PD5pin 41 | Connected to: Not connected 75% · a signal 25% | — |
| PD6pin 43 | Connected to: Not connected 75% · a signal 25% | — |
| PE2pin 46 | Connected to: Not connected 75% · a signal 25% | — |
| PE3pin 47 | Connected to: Not connected 75% · a signal 25% | — |
| PF1pin 51 | Connected to: Not connected 75% · a signal 25% | — |
| PF2pin 52 | Connected to: Not connected 75% · a signal 25% | — |
| PF0pin 53 | Connected to: Not connected 75% · a signal 25% | — |
| PG13/ETH_TXD0pin 68 | Connected to: Not connected 100% | — |
| STLINK_RX/PD9pin 69 | Connected to: Not connected 75% · a signal 25% | — |
| PG11/ETH_TX_ENpin 70 | Connected to: Not connected 75% · a signal 25% | — |
| PC9pin 73 | Connected to: Not connected 75% · a signal 25% | — |
| PC8pin 74 | Connected to: Not connected 75% · a signal 25% | — |
| PC6pin 76 | Connected to: Not connected 75% · a signal 25% | — |
| ETH_RXD1/PC5pin 78 | Connected to: Not connected 100% | — |
92 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Motherboard by morzack, Procyon hw by athanniss, CabShield by Avery-Jutkowitz and Mic test pcb by jbrryhooves.
The NUCLEO144-H743ZI in open source designs
The gallery holds 5 open source boards using the NUCLEO144-H743ZI from 5 GitHub repositories; a typical one measures about 125 × 100 mm and carries around 192 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Motherboard by morzack.
What boards using the NUCLEO144-H743ZI are built for
NUCLEO144-H743ZI: common questions
Where can I find a NUCLEO144-H743ZI reference design?
Each of the 5 boards on this page is a real design using the NUCLEO144-H743ZI. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the NUCLEO144-H743ZI IOREF pin connected?
The IOREF pin is left unconnected on 4 of 4 designs. Counted from the KiCad layouts of 5 open source designs using the NUCLEO144-H743ZI.
How is the NUCLEO144-H743ZI +5V pin connected?
The +5V pin is left unconnected on 4 of 4 designs. Counted from the KiCad layouts of 5 open source designs using the NUCLEO144-H743ZI.
How is the NUCLEO144-H743ZI PG13/ETH_TXD0 pin connected?
The PG13/ETH_TXD0 pin is left unconnected on 4 of 4 designs. Counted from the KiCad layouts of 5 open source designs using the NUCLEO144-H743ZI.
How big is a typical board using the NUCLEO144-H743ZI?
The median is 125 × 100 mm, and 0% are two-layer designs.
What is the most popular open source board using the NUCLEO144-H743ZI?
By GitHub stars, Motherboard by morzack, with 1 stars.
Can I simulate one of these boards using the NUCLEO144-H743ZI before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.