Thor offroading-
ATHARVA316-DEV·thor_offroading-
About the Thor offroading- PCB
Thor offroading- is an open source ESP32 PCB design by ATHARVA316-DEV, published on GitHub. It is a board, with 22 components from 15 distinct parts.
Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the AP2112K-3.3, DC DC_StepDown_LM2596, MAX3232, MC34152 and MAX485E. By type, the board carries 6 ICs, 5 diodes, 5 resistors, 2 transistors, 2 connectors and 2 capacitors.
Main components on the Thor offroading-
Thor offroading- bill of materials (BOM)
22 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 1 | DC DC_StepDown_LM2596 | DCDC_StepDown_LM2596 | U2 |
| 1 | MAX3232 | U3 | |
| 1 | MC34152 | SW_DIP_SPSTx04_Slide_Copal_CHS-04A_W5.08mm_P1.27mm_JPin | U4 |
| 1 | MAX485E | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | ESP32-DEVKIT-V1 | MODULE_ESP32_DEVKIT_V1 | U6 |
| 2 | IRF6631 | DirectFET_SQ | Q1, Q2 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix_MKDS-3-2-5.08_1x02_P5.08mm_Horizontal | J1 |
| 1 | Conn_01x04_Socket | JST_XH_B4B-XH-A_1x04_P2.50mm_Vertical | J2 |
| 1 | LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 4 | LED | D2, D3, D4, D5 | |
| 2 | 1uF | C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C2 |
| 1 | 220 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 2 | 10k | R2, R3 | |
| 2 | 220 | R4, R5 |
Thor offroading- design files
The KiCad project lives in the ATHARVA316-DEV/thor_offroading- repository on GitHub; these links point at the commit this page was built from.
- Schematichaya_offroading.kicad_sch
- Netlisthaya_offroading1.net
Thor offroading-: common questions
What microcontroller does the Thor offroading- use?
The Thor offroading- is built around the ESP32-DEVKIT-V1, from the ESP32 family.
How many components are on the Thor offroading-?
22 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Thor offroading- design files?
From the ATHARVA316-DEV/thor_offroading- repository on GitHub, which has the schematic and a netlist; the links under Design files point to each one.
Can I use the Thor offroading- design in my own project?
The repository has no license, so all rights stay with ATHARVA316-DEV. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Thor offroading- without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k