7 open source boards using the TLV75901PDRVR

Real designs built with the TLV75901PDRVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the TLV75901PDRVR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TLV75901PDRVR connects to, and the resistors, capacitors and other passives placed on it.

  • The FB pin has a resistor to GND on 4 of 5 designs, most often 10 kΩ (then 20 kΩ).
  • The FB pin has a pull-up to 3.3V on 4 of 5 designs, most often 100 kΩ (then 10 kΩ).
  • The OUT pin is tied to 3.3V on 3 of 5 designs (a signal on 2).
  • The EN pin is tied to 5V on 3 of 5 designs (a signal on 2).
OUTpin 1Connected to: 3.3V 60% · a signal 40%
FBpin 2Connected to: Signal 100%
  • Resistor to GND on 80% · 10 kΩ (2), 20 kΩ (2)
  • Pull-up to 3.3V on 80% · 100 kΩ (2), 10 kΩ (1), 47 kΩ (1)
  • Series resistor on 40% · 47 kΩ (1), 60.4 kΩ (1), 43 kΩ (1)
GNDpin 3Connected to: GND 80% · 3.3V 20%
ENpin 4Connected to: 5V 60% · a signal 40%
DNCpin 5Connected to: Not connected 100%
INpin 6Connected to: 5V 60% · a signal 40%
EPpin 7Connected to: GND 80% · 3.3V 20%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Esp32 minimal by atopile, Cell by atopile, Default by glovepost and Default by cHemingway.

The TLV75901PDRVR in open source designs

The gallery holds 7 open source boards using the TLV75901PDRVR from 5 GitHub repositories; a typical one measures about 45 × 26.8 mm and carries around 85 components.

57% use four copper layers or more, and 86% carry an open source license.

The most starred is Esp32 minimal by atopile.

Parts used alongside the TLV75901PDRVR

Microcontrollers on boards using the TLV75901PDRVR

What boards using the TLV75901PDRVR are built for

TLV75901PDRVR: common questions

Where can I find a TLV75901PDRVR reference design?

Each of the 7 boards on this page is a real design using the TLV75901PDRVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the TLV75901PDRVR FB pin?

The FB pin has a resistor to GND on 4 of 5 designs, most often 10 kΩ (then 20 kΩ). Counted from the KiCad layouts of 5 open source designs using the TLV75901PDRVR.

How is the TLV75901PDRVR OUT pin connected?

The OUT pin is tied to 3.3V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the TLV75901PDRVR.

How is the TLV75901PDRVR EN pin connected?

The EN pin is tied to 5V on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the TLV75901PDRVR.

Which microcontrollers do boards using the TLV75901PDRVR use?

Most are built on ESP32 (2) and STM32 (1).

How big is a typical board using the TLV75901PDRVR?

The median is 45 × 26.8 mm, and 43% are two-layer designs.

What is the most popular open source board using the TLV75901PDRVR?

By GitHub stars, Esp32 minimal by atopile, with 4,032 stars.

Can I simulate one of these boards using the TLV75901PDRVR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part