Cell
atopile·cell-sim·elec/layout/cell/cell.kicad_pcb
About the Cell PCB
Cell is an open source PCB design by atopile, published on GitHub under the MIT license. It is a 4-layer board measuring 92.9 × 7.9 mm, with 63 components from 49 distinct parts.
Other key parts include the C2913205, C139797, C709357, C32843 and C910371. By type, the board carries 25 resistors, 16 capacitors, 14 ICs, 3 transistors, 3 LEDs and 2 inductors.
It belongs with the power & battery designs in this gallery.
From the project
This cell-sim is designed to mimic a LiPo battery pack for develpoment of the surrounding electronics, like a BMS.
This cell-sim is designed to mimic a LiPo battery pack for develpoment of the surrounding electronics, like a BMS.
- 16 channels - Open-Source hardware design, you can embed onto your own HIL setup - ⚡️ 0-4.5V and 0-500mA per channel - DMM muxed to each channel for arbitarily precise measurment - Open-circuit simulation on each channel - 📏 16bit ADC feedback for voltage and current - 🔌 USB w/ Python software interface (+ 100MBit Ethernet + WiFi waiting for firmware support)
Main components on the Cell
Cell bill of materials (BOM)
63 components, 49 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C2913205 ? | PWRM-TH_BXXXXS-2WR2 | U1 |
| 1 | C139797 ? | MSOP-10_L3.0-W3.0-P0.50-LS5.0-BL | U2 |
| 1 | C709357 ? | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U3 |
| 1 | C32843 ? | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U4 |
| 1 | C910371 ? | SOT-23-6_L2.9-W1.6-P0.95-LS2.8-BL | U5 |
| 1 | C70582 ? | WSON-6_L2.0-W2.0-P0.65-TL-EP | U6 |
| 1 | C2059320 ? | SOT-563_L1.6-W1.2-P0.50-LS1.6-TL | U7 |
| 1 | C7437321 ? | RELAY-SMD_HFD4-5-SR | U8 |
| 1 | C7437322 ? | RELAY-SMD_HFD4-5-SR | U9 |
| 1 | C2718488 ? | QFN-16_L3.0-W3.0-P0.50-BL-EP1.7 | U10 |
| 1 | C130026 ? | SOIC-8_L4.9-W3.9-P1.27-LS6.0-TL | U11 |
| 1 | C130026 ? | LED-SMD_4P-L2.0-W2.0-BR | U12 |
| 1 | C225807 ? | LED-SMD_4P-L2.0-W2.0-BR | U13 |
| 1 | C443854 ? | SOT-23-5_L3.0-W1.7-P0.95-LS2.8-BL | U14 |
| 3 | C5364305 ? | SOT-23-3_L2.9-W1.3-P1.90-LS2.4-BR | Q1, Q2, Q3 |
| 3 | C12624 ? | LED0603-RD | LED1, LED2, LED3 |
| 1 | 7447709101 ? | IND-SMD_L4.4-W4.2 | L1 |
| 1 | C341013 ? | IND-SMD_L4.0-W4.0 | L2 |
| 1 | C1525 50V 2.2uF X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS | C0805 | C1 |
| 2 | C15850 25V 10uF X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS | C0805 | C2, C3 |
Show 29 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C46653 25V 10uF X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS | C0805 | C4 |
| 1 | C1532 16V 100nF X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS | C0402 | C5 |
| 2 | C93654 25V 10uF X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS | C0805 | C6, C7 |
| 1 | C15195 25V 10uF X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS | C0805 | C8 |
| 1 | C15195 16V 100nF X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS | C0402 | C9 |
| 1 | C23733 25V 1uF X5R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS | C0402 | C10 |
| 2 | C1525 25V 10uF X5R ±10% 0805 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS | C0805 | C11, C12 |
| 2 | C1525 16V 100nF X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS | C0402 | C13, C14 |
| 2 | C1525 25V 1uF X5R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHS | C0402 | C15, C16 |
| 1 | C25744 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 14kΩ 0402 Chip Resistor - Surface Mount ROHS | R0402 | R1 |
| 1 | C25905 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 24kΩ 0402 Chip Resistor - Surface Mount ROHS | R0402 | R2 |
| 1 | C25905 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 37.4kΩ 0402 Chip Resistor - Surface Mount ROHS | R0402 | R3 |
| 2 | C25087 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 10kΩ 0402 Chip Resistor - Surface Mount ROHS | R0402 | R4, R5 |
| 1 | C25105 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 43kΩ 0402 Chip Resistor - Surface Mount ROHS | R0402 | R6 |
| 1 | C25105 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 60.4kΩ 0402 Chip Resistor - Surface Mount ROHS | R0402 | R7 |
| 2 | C25120 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 10kΩ 0402 Chip Resistor - Surface Mount ROHS | R0402 | R8, R9 |
| 1 | C25077 125mW Thick Film Resistors 150V ±1% 100mΩ 0805 Chip Resistor - Surface Mount ROHS | R0805 | R10 |
| 1 | C25105 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 13kΩ 0402 Chip Resistor - Surface Mount ROHS | R0402 | R11 |
| 1 | C25105 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 10kΩ 0402 Chip Resistor - Surface Mount ROHS | R0402 | R12 |
| 1 | C25120 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 1kΩ 0402 Chip Resistor - Surface Mount ROHS | R0402 | R13 |
| 1 | C25120 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 13kΩ 0402 Chip Resistor - Surface Mount ROHS | R0402 | R14 |
| 1 | C11692 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 10kΩ 0402 Chip Resistor - Surface Mount ROHS | R0402 | R15 |
| 1 | C26083 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 1kΩ 0402 Chip Resistor - Surface Mount ROHS | R0402 | R16 |
| 1 | C105362 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 1kΩ 0402 Chip Resistor - Surface Mount ROHS | R0402 | R17 |
| 1 | C19709 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 10kΩ 0402 Chip Resistor - Surface Mount ROHS | R0402 | R18 |
| 1 | C25915 125mW Thick Film Resistors 150V ±100ppm/℃ ±1% 226Ω 0805 Chip Resistor - Surface Mount ROHS | R0805 | R19 |
| 4 | C25744 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 10kΩ 0402 Chip Resistor - Surface Mount ROHS | R0402 | R20, R21, R24, R25 |
| 1 | C25744 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 11.5kΩ 0402 Chip Resistor - Surface Mount ROHS | R0402 | R22 |
| 1 | C25744 62.5mW Thick Film Resistors 50V ±100ppm/℃ ±1% 6.2kΩ 0402 Chip Resistor - Surface Mount ROHS | R0402 | R23 |
Cell design files
The KiCad project lives in the atopile/cell-sim repository on GitHub; these links point at the commit this page was built from.
Cell: common questions
How big is the Cell PCB?
The Cell measures 92.9 × 7.9 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Cell?
63 components, from 49 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Cell design files?
From the atopile/cell-sim repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Cell design in my own project?
Yes, under the terms of its MIT license, which atopile chose for the repository.
More boards in cell-sim
Cell sim
atopile
220 × 110 mm1152 parts4LMIT24Ethernet
atopile
33.2 × 17.3 mm32 parts2LMIT24Tca9548apwr
atopile
10.5 × 12.4 mm20 parts2LMIT24Lv2842xlvddcr
atopile
72.3 × 100.8 mm8 parts2LMIT24Saleae header
atopile
72.3 × 100.8 mm5 parts2LMIT24Ldk220m r
atopile
72.3 × 100.8 mm5 parts2LMIT24Bq24045dsqr
atopile
72.3 × 100.8 mm4 parts2LMIT24Level shifter
atopile
72.3 × 100.8 mm3 parts2LMIT24Usbc
atopile
72.3 × 100.8 mm3 parts2LMIT24
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k