Half life week3-Instrument-Maestro-Mini
avilldev·half-life-week3-Instrument-Maestro-Mini·Maestro Mini/Maestro Mini.kicad_pcb
About the Half life week3-Instrument-Maestro-Mini PCB
Half life week3-Instrument-Maestro-Mini is an open source ESP32 PCB design by avilldev, published on GitHub. It is a 2-layer board measuring 104.9 × 110 mm, with 18 components from 8 distinct parts.
Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the MCP23017x-x-SP. By type, the board carries 10 switches, 3 resistors, 2 ICs and 1 capacitor.
It belongs with the audio, displays & leds and test & measurement designs in this gallery.
From the project
The Maestro Mini is a device that can give you all the notes in an octave and can also play a tune! It is useful to use in tuning and ear training.
The Maestro Mini is a device that can give you all the notes in an octave and can also play a tune! It is useful to use in tuning and ear training.
Microcontroller: Seeed Studio XIAO ESP32-C3 I/O Expander: MCP23017 Audio Output: PAM8302 Audio Amplifier Display: 0.96" OLED Inputs: 10x Cherry MX Mechanical Switches Passive Components: 2x 4.7kΩ resistors (I2C pull-ups) 1x 1kΩ resistor and 1x 100nF ceramic capacitor (audio smoothing filter) Base:** Custom PCB
Main components on the Half life week3-Instrument-Maestro-Mini
Half life week3-Instrument-Maestro-Mini bill of materials (BOM)
18 components, 8 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP23017x-x-SP | DIP-28_W7.62mm | U1 |
| 1 | XIAO-ESP32-C3-SMD | XIAO-ESP32-C3-SMD | U2 |
| 1 | Conn_01x05 | PinHeader_1x05_P2.54mm_Vertical | AdafruitPAM8302 |
| 1 | Conn_01x04 | Display_128x64_096_I2C | OLED1 |
| 10 | SW_Push | Test_SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +2 |
| 1 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 2 | 4.7k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
Half life week3-Instrument-Maestro-Mini design files
The KiCad project lives in the avilldev/half-life-week3-Instrument-Maestro-Mini repository on GitHub; these links point at the commit this page was built from.
Half life week3-Instrument-Maestro-Mini: common questions
What microcontroller does the Half life week3-Instrument-Maestro-Mini use?
The Half life week3-Instrument-Maestro-Mini is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.
How big is the Half life week3-Instrument-Maestro-Mini PCB?
The Half life week3-Instrument-Maestro-Mini measures 104.9 × 110 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Half life week3-Instrument-Maestro-Mini?
18 components, from 8 distinct parts. The full bill of materials is listed on this page.
Where can I download the Half life week3-Instrument-Maestro-Mini design files?
From the avilldev/half-life-week3-Instrument-Maestro-Mini repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Half life week3-Instrument-Maestro-Mini design in my own project?
The repository has no license, so all rights stay with avilldev. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Half life week3-Instrument-Maestro-Mini without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k