HLW1-PCB-Astrobie

avilldev·HLW1-PCB-Astrobie·schematic/schematic.kicad_pcb

HLW1-PCB-Astrobie layout, top view — open source ESP32 board by avilldev

About the HLW1-PCB-Astrobie

HLW1-PCB-Astrobie is an open source ESP32 PCB design by avilldev, published on GitHub. It is a 2-layer board measuring 140 × 65 mm, with 7 components from 6 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the DHT11. By type, the board carries 2 ICs, 2 connectors, 2 switches and 1 resistor.

It belongs with the sensors and displays & leds designs in this gallery.

From the project

Astrobie is a custom-designed PCB digital pet powered by a Seeed XIAO ESP32-C3. This project was made for the first-week PCB submission for Hackclub's Half Life program. It is based on their beginner guide, Starbie. However, I customized the project to have a different theme. It

Astrobie is a custom-designed PCB digital pet powered by a Seeed XIAO ESP32-C3. This project was made for the first-week PCB submission for Hackclub's Half Life program. It is based on their beginner guide, Starbie. However, I customized the project to have a different theme. It features a UFO-themed circuit board, a 128x64 OLED screen displaying an alien sprite, an MPU6050 accelerometer, a DHT11 temperature/humidity sensor, and two push buttons.

HLW1-PCB-Astrobie, from the project README
From the project README

Main components on the HLW1-PCB-Astrobie

HLW1-PCB-Astrobie bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
XIAO-ESP32-C3-SMD
U1
1
DHT11
U2
1
Conn_01x04_Pin
J1
1
Conn_01x08_Pin
J2
2
SW_Push
SW1, SW2
1
10k
R1

HLW1-PCB-Astrobie design files

The KiCad project lives in the avilldev/HLW1-PCB-Astrobie repository on GitHub; these links point at the commit this page was built from.

HLW1-PCB-Astrobie: common questions

What microcontroller does the HLW1-PCB-Astrobie use?

The HLW1-PCB-Astrobie is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the HLW1-PCB-Astrobie?

The HLW1-PCB-Astrobie measures 140 × 65 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the HLW1-PCB-Astrobie?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the HLW1-PCB-Astrobie design files?

From the avilldev/HLW1-PCB-Astrobie repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the HLW1-PCB-Astrobie design in my own project?

The repository has no license, so all rights stay with avilldev. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the HLW1-PCB-Astrobie without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards