CC
AwesomeSno·CC·kicad/memento.kicad_pcb
About the CC PCB
CC is an open source ESP32 PCB design by AwesomeSno, published on GitHub. It is a 2-layer board measuring 42 × 75 mm, with 11 components from 11 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N8R8, from the ESP32 family. Other key parts include the TP4056 and ME6211C33M5G. By type, the board carries 3 ICs, 3 switches, 2 connectors and 1 module.
It belongs with the audio, power & battery and iot & wireless designs in this gallery.
From the project
Wearable AI audio companion & conversational coach with speech emotion recognition and daily debriefs
An intelligent personal memory and conversation analysis device built for Hack Club's Half Life. MEMENTO captures authorized real-world conversations on a dedicated, portable hardware recorder, preserves them to local microSD storage, and syncs with a local macOS companion app for on-device transcription, speaker diarization, vocal tone analysis, and daily executive summaries.
Main components on the CC
CC bill of materials (BOM)
11 components, 11 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N8R8 | ESP32-S3-WROOM-1 | U1 |
| 1 | TP4056 | SOIC-8_3.9x4.9mm_P1.27mm | U2 |
| 1 | ME6211C33M5G | SOT-23-5 | U3 |
| 1 | 1027_ERM_MOTOR | R_0805_2012Metric | M1 |
| 1 | MicroSD_Socket | microSD_HC_Hirose_DM3AT-SF-PEJM5 | J1 |
| 1 | USB_C_16P | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J2 |
| 1 | OLED_0.96_SSD1306 | PinHeader_1x04_P2.54mm_Vertical | DISP1 |
| 1 | INMP441 | InvenSense_INMP441 | MIC1 |
| 1 | SPDT_MUTE | SW_SPDT_CK_JS102011SAQN | SW1 |
| 1 | BTN_REC | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW2 |
| 1 | BTN_MARK | SW_Push_1P1T_NO_6x6mm_H9.5mm | SW3 |
CC design files
The KiCad project lives in the AwesomeSno/CC repository on GitHub; these links point at the commit this page was built from.
- Layoutkicad/memento.kicad_pcb
- Schematickicad/memento.kicad_sch
- BOMBOM.csv
CC: common questions
What microcontroller does the CC use?
The CC is built around the ESP32-S3-WROOM-1-N8R8, from the ESP32 family.
How big is the CC PCB?
The CC measures 42 × 75 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the CC?
11 components, from 11 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the CC design files?
From the AwesomeSno/CC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the CC design in my own project?
The repository has no license, so all rights stay with AwesomeSno. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the CC without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8k