12 open source boards using the ME6211C33M5G
Real designs built with the ME6211C33M5G, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Esp32c3-smart board
petrovgp
42.6 × 45.7 mm64 parts4LNo license1UINIO-MCU-HC32F460KETA
uinika
73.4 × 42.9 mm44 parts2LNo license1Telematics tracker
Immanueldavidckp
82 × 62 mm190 parts4LNo license0ESP32
ESP32IoTPlatform
jkordek1
190 × 105.2 mm115 parts2LNo license0RP2040/RP2350
Defcon badge
LastZactionHero
88 × 54 mm76 parts4LMIT0UINIO-MCU-HC32F460PETB
uinika
93.7 × 53.1 mm52 parts2LNo license0ESP32
CC
AwesomeSno
42 × 75 mm11 parts2LNo license0- schematic only · 75 partsRP2040/RP2350
Pikkolo mesh stick
LastZactionHero
75 partsNo license0 ESP32
Roomnode s3
AskAlice
65 × 50 mm31 parts2LNo license0ESP32
Remote
harshverma27
46.5 × 66 mm17 parts2LNo license0ESP32
Dome Plate Controller V1
greghulette
118 × 78.6 mm33 parts4LNo license2ESP32
Dome Logics V1
greghulette
54.9 × 51.9 mm26 parts4LNo license2
How designs wire the ME6211C33M5G
Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the ME6211C33M5G connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 7 of 9 designs, most often 1 µF (then 10 µF).
- The VOUT pin has a decoupling capacitor on 7 of 9 designs, most often 1 µF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VINpin 1 | Connected to: 5V 67% · a signal 33% |
|
| VSSpin 2 | Connected to: GND 100% | — |
| NCpin 4 | Connected to: Not connected 100% | — |
| VOUTpin 5 | Connected to: 3.3V 78% · a signal 22% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Dome Logics V1 by greghulette, Esp32c3-smart board by petrovgp, UINIO-MCU-HC32F460KETA by uinika and CC by AwesomeSno.
The ME6211C33M5G in open source designs
The gallery holds 12 open source boards using the ME6211C33M5G from 11 GitHub repositories; a typical one measures about 73.4 × 54 mm and carries around 48 components.
55% are two-layer designs, the rest use four layers or more, and 8% carry an open source license.
The most starred is Dome Plate Controller V1 by greghulette.
Parts used alongside the ME6211C33M5G
Microcontrollers on boards using the ME6211C33M5G
What boards using the ME6211C33M5G are built for
ME6211C33M5G: common questions
Where can I find a ME6211C33M5G reference design?
Each of the 12 boards on this page is a real design using the ME6211C33M5G. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ME6211C33M5G VIN pin?
The VIN pin has a decoupling capacitor on 7 of 9 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the ME6211C33M5G.
What decoupling capacitors do designs use on the ME6211C33M5G VOUT pin?
The VOUT pin has a decoupling capacitor on 7 of 9 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 9 open source designs using the ME6211C33M5G.
What parts are used alongside the ME6211C33M5G?
The TP4056, MPU-6050 and RP2040 appear in the most repositories here.
Which microcontrollers do boards using the ME6211C33M5G use?
Most are built on ESP32 (7) and RP2040/RP2350 (2).
How big is a typical board using the ME6211C33M5G?
The median is 73.4 × 54 mm, and 55% are two-layer designs.
What is the most popular open source board using the ME6211C33M5G?
By GitHub stars, Dome Plate Controller V1 by greghulette, with 2 stars.
Can I simulate one of these boards using the ME6211C33M5G before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.