Entrenamiento-328p

ayemi-dev·pcb-ayemi·placas/entrenamiento-328p/entrenamiento-328p.kicad_pcb

Entrenamiento-328p PCB layout, top view — open source AVR/Arduino board by ayemi-dev

About the Entrenamiento-328p PCB

Entrenamiento-328p is an open source AVR/Arduino PCB design by ayemi-dev, published on GitHub. It is a 2-layer board measuring 90 × 60 mm, with 71 components from 46 distinct parts.

Its main chip is the ATMEGA328P-AU, from the AVR/Arduino family. Other key parts include the CH340C, USBLC6-2SC6 and AP2112K-3.3. By type, the board carries 26 resistors, 12 capacitors, 10 connectors, 9 diodes, 4 ICs and 4 switches.

From the project

Placas abiertas de Ayemi: Chispa (ATmega328P), Enlace (ESP32-S3) e Impulso (STM32F411). KiCad, Gerber, BOM y firmware.

Chispa por Ayemi es una placa de 90 × 60 mm, de dos capas, para enseñar programación y electrónica a niños y adolescentes de 10 a 15 años en tres niveles: Explorar (bloques, sin cables), Conectar (módulos de 4 pines) y Construir (código y pines). Lleva un ATmega328P a 16 MHz, USB-C con convertidor CH340C, y ya trae soldados tres LED, un LED RGB, dos botones, un zumbador, un potenciómetro y un sensor de luz. Se programa desde el IDE de Arduino eligiendo la placa «Arduino Uno».

Main components on the Entrenamiento-328p

Entrenamiento-328p bill of materials (BOM)

71 components, 46 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ATMEGA328P-AU
ATmega328P-AU
U1
1
CH340C
U101
1
USBLC6-2SC6
U102
1
AP2112K-3.3
U201
1
S8050
Q301
1
TEMT6000X01
Q302
1
16MHZ
16MHz
Y1
1
C65114
ICSP
J1
1
C165948
USB-C
J101
1
C265102
I2C 1
J401
1
C265102
I2C 2
J402
1
C265102
SERIE
J403
1
C265102
ANALOGICO 1
J404
1
C265102
ANALOGICO 2
J405
1
C492405
SPI
J406
1
C22465875
D0-D13 y GND
J407
1
C2840012
A0-A7 y alimentacion
J408
1
C7421674
Buzzer 5V
BZ301
1
500MA
500mA
F201
1
10K
10k
RV301
Show 26 more
QtyPartRefs
1
C319409
RESET
SW1
1
C319409
Botón A
SW301
1
C319409
Botón B
SW302
1
DIP8
SW303
2
1N4148W
D1, D305
1
C2286
TX
D101
1
C2286
RX
D102
1
C2288
Azul
D201
1
C2286
Rojo
D301
1
C12624
Verde
D302
1
C2287
Amarillo
D303
1
C3647023
RGB
D304
2
22PF
22pF
C1, C2
7
100NF
100nF
C3, C4, C5, C6, C101, C102, C103
1
10UF
10uF
C201
2
1UF
1uF
C202, C203
3
10K
10k
R1, R310, R312
2
5.1K
5.1k
R101, R102
5
1k
R103, R104, R301, R309, R313
3
1.5K
1.5k
R105, R106, R201
2
510
R302, R306
2
680
R303, R304
1
560
R305
2
330
R307, R308
4
10
R311, R314, R315, R316
2
4.7K
4.7k
R401, R402

Entrenamiento-328p design files

The KiCad project lives in the ayemi-dev/pcb-ayemi repository on GitHub; these links point at the commit this page was built from.

Entrenamiento-328p: common questions

What microcontroller does the Entrenamiento-328p use?

The Entrenamiento-328p is built around the ATMEGA328P-AU, from the AVR/Arduino family.

How big is the Entrenamiento-328p PCB?

The Entrenamiento-328p measures 90 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Entrenamiento-328p?

71 components, from 46 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Entrenamiento-328p design files?

From the ayemi-dev/pcb-ayemi repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Entrenamiento-328p design in my own project?

The repository has no license, so all rights stay with ayemi-dev. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Entrenamiento-328p without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug AVR/Arduino firmware against it before you order a PCB.

More boards in pcb-ayemi

Similar boards