Enlace esp32s3

ayemi-dev·pcb-ayemi·placas/enlace-esp32s3/enlace-esp32s3.kicad_pcb

Enlace esp32s3 PCB layout, top view — open source ESP32 board by ayemi-dev

About the Enlace esp32s3 PCB

Enlace esp32s3 is an open source ESP32 PCB design by ayemi-dev, published on GitHub. It is a 2-layer board measuring 90 × 60 mm, with 65 components from 41 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N8, from the ESP32 family. Other key parts include the USBLC6-2SC6, AP7361C-33E and SHT40. By type, the board carries 25 resistors, 9 connectors, 8 capacitors, 6 diodes, 5 transistors and 5 switches.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

Placas abiertas de Ayemi: Chispa (ATmega328P), Enlace (ESP32-S3) e Impulso (STM32F411). KiCad, Gerber, BOM y firmware.

Enlace por Ayemi es una placa de 90 × 60 mm, de dos capas, para secundaria y preparatoria: lleva un módulo ESP32-S3-WROOM-1-N8 con WiFi y Bluetooth LE, USB-C directo al micro, un sensor de temperatura y humedad SHT40, y ya trae soldados tres LED, un LED RGB, dos botones, un zumbador, una perilla y un sensor de luz. Tiene cinco conectores de 4 pines (I2C 1, I2C 2, SERIE, ANALÓGICO 1 y 2), un conector para pantalla OLED y dos headers con los pines libres. Se programa desde el IDE de Arduino con el núcleo esp32 de Espressif.

Main components on the Enlace esp32s3

Enlace esp32s3 bill of materials (BOM)

65 components, 41 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1-N8
U1
1
USBLC6-2SC6
U102
1
AP7361C-33E
U201
1
SHT40
U301
1
S8050
Q301
1
TEMT6000X01
Q302
3
2N7002
Q303, Q304, Q305
1
C165948
USB-C
J101
1
C265102
I2C 1
J401
1
C265102
I2C 2
J402
1
C265102
SERIE
J403
1
C265102
ANALOGICO 1
J404
1
C265102
ANALOGICO 2
J405
1
C492403
PANTALLA
J406
1
C492409
IO A
J407
1
C2840012
IO B
J408
1
C7421674
Buzzer 5V
BZ301
1
500MA
500mA
F201
1
10K
10k
RV301
1
C319409
RESET
SW1
Show 21 more
QtyPartRefs
1
C319409
BOOT
SW2
1
C319409
Botón A
SW301
1
C319409
Botón B
SW302
1
DIP10
SW303
1
C2288
Azul
D201
1
C2286
Rojo
D301
1
C2289
Verde amarillento
D302
1
C2287
Amarillo
D303
1
C3029073
RGB
D304
1
1N4148W
D305
4
10UF
10uF
C1, C201, C202, C203
3
100NF
100nF
C2, C3, C301
1
1UF
1uF
C4
6
10K
10k
R1, R310, R312, R320, R321, R322
2
5.1K
5.1k
R101, R102
1
1.5K
1.5k
R201
5
330
R301, R302, R303, R307, R308
3
560
R304, R305, R306
2
1k
R309, R313
4
10
R311, R314, R315, R316
2
4.7K
4.7k
R401, R402

Enlace esp32s3 design files

The KiCad project lives in the ayemi-dev/pcb-ayemi repository on GitHub; these links point at the commit this page was built from.

Enlace esp32s3: common questions

What microcontroller does the Enlace esp32s3 use?

The Enlace esp32s3 is built around the ESP32-S3-WROOM-1-N8, from the ESP32 family.

How big is the Enlace esp32s3 PCB?

The Enlace esp32s3 measures 90 × 60 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Enlace esp32s3?

65 components, from 41 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Enlace esp32s3 design files?

From the ayemi-dev/pcb-ayemi repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Enlace esp32s3 design in my own project?

The repository has no license, so all rights stay with ayemi-dev. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Enlace esp32s3 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in pcb-ayemi

Similar boards