Poromodo

AYUSH-pro-grammer·poromodo·kicad/Untitled/poromodo.kicad_pcb

Poromodo PCB layout, top view — open source ESP32 board by AYUSH-pro-grammer

About the Poromodo PCB

Poromodo is an open source ESP32 PCB design by AYUSH-pro-grammer, published on GitHub. It is a 2-layer board measuring 82 × 36 mm, with 24 components from 21 distinct parts.

Its main chip is the XIAO-ESP32-C3-SMD, from the ESP32 family. Other key parts include the AP63205WU. By type, the board carries 5 capacitors, 4 resistors, 3 connectors, 3 switches, 3 diodes and 2 ICs.

It belongs with the iot & wireless, sensors and displays & leds designs in this gallery.

From the project

A mini pomodoro timer powered by a battery. This was designed using KiCad to create a custom PCB. A small case was designed to house the timer board, OLED and movement sensor. The aim of this project is to create an easy to use and easy to build timer that can rotate the display

A mini pomodoro timer powered by a battery. This was designed using KiCad to create a custom PCB. A small case was designed to house the timer board, OLED and movement sensor. The aim of this project is to create an easy to use and easy to build timer that can rotate the display depending on how it is held.

The design includes a 2S Li-Ion battery, 5V buck converter, 0.96 inch OLED and GY-521 module with MPU-6050. The XIAO manages the timer logic and provides Wi-Fi and Bluetooth Low Energy for future features.

Poromodo, from the project README
From the project README

Main components on the Poromodo

Poromodo bill of materials (BOM)

24 components, 21 distinct parts.

QtyPartRefs
1
XIAO-ESP32-C3-SMD
U1
1
AP63205WU
U2
1
Q_NPN_BEC
Q1
1
AO3401A
Q2
1
oledDisplay
J1
1
battery
J2
1
Conn_01x08
J4
1
Buzzer
BZ1
2
SW_Push
SW1, SW3
1
SW_SPST
SW2
1
D
D1
1
D_Schottky
D2
1
LED
D3
1
4.7uH
L1
2
22uF
C1, C2
2
100nF
C3, C5
1
10uF
C4
1
1K
R1
1
100k
R2
1
33k
R3
Show 1 more
QtyPartRefs
1
470
R4

Poromodo design files

The KiCad project lives in the AYUSH-pro-grammer/poromodo repository on GitHub; these links point at the commit this page was built from.

Poromodo: common questions

What microcontroller does the Poromodo use?

The Poromodo is built around the XIAO-ESP32-C3-SMD, from the ESP32 family.

How big is the Poromodo PCB?

The Poromodo measures 82 × 36 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Poromodo?

24 components, from 21 distinct parts. The full bill of materials is listed on this page.

Where can I download the Poromodo design files?

From the AYUSH-pro-grammer/poromodo repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Poromodo design in my own project?

The repository has no license, so all rights stay with AYUSH-pro-grammer. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Poromodo without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards