Akl ad1

azonenberg·starshipraider·boards/probes/akl-ad1/akl-ad1.kicad_pcb

Akl ad1 PCB layout, top view — open source STM32 board by azonenberg

About the Akl ad1 PCB

Akl ad1 is an open source STM32 PCB design by azonenberg, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 43 × 45.8 mm, with 39 components from 24 distinct parts.

Its main chip is the 497-18740-1, from the STM32 family. Other key parts include the 296-35573-1 and 296-47616-1. By type, the board carries 19 capacitors, 7 connectors, 6 ICs, 4 resistors and 2 inductors.

It belongs with the displays & leds and test & measurement designs in this gallery.

From the project

Open hardware test equipment

This is the umbrella repo for a lot of my T&M projects. Some will end up in separate repos.

Boards, subsystems, etc are all named after famous electrical engineers who made major contributions to the field of test equipment design.

All instruments are planned to share the same basic platform. Generally speaking, this platform will be:

* 1U rackmount, depth dependent on the specific instrument.

Main components on the Akl ad1

296-35573-1497-18740-1296-47616-1

Akl ad1 bill of materials (BOM)

39 components, 24 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
296-35573-1
LMH6401
U1
1
296-35573-1
LT3042
U2
1
296-35573-1
LT3093
U3
1
296-35573-1
MCP1703T-2502E/CB
U4
1
497-18740-1
STM32F031-QFN28
U5
1
296-47616-1
TXB0104RUT
U6
1
WM1119
3211-60087
J1
1
901-10511-3
J2
1
SAM13196
TESTPOINT
J3
1
WM6754
BARREL
J4
1
BARREL
J5
1
Conn_01x05
J6
1
Conn_01x04
J7
1
SM-43TW103
RV1
2
490-10592-1
BLM31KN271SH1L
L1, L2
2
1276-1907-2
4.7 uF
C3, C4
4
1276-1907-2
0.47 uF
C5, C6, C7, C8
3
1276-1173-2
4.7 uF 16V
C9, C10, C11
6
1276-1173-2
0.47 uF
C12, C13, C18, C19, C20, C21
4
1276-1173-2
4.7 uF
C14, C15, C16, C17
Show 4 more
QtyPartRefs
1
4.7K
49.9
R1
1
10K
24.9K
R2
1
4.7K
24.9K
R3
1
10K
R4

Akl ad1 design files

The KiCad project lives in the azonenberg/starshipraider repository on GitHub; these links point at the commit this page was built from.

Akl ad1: common questions

What microcontroller does the Akl ad1 use?

The Akl ad1 is built around the 497-18740-1, from the STM32 family.

How big is the Akl ad1 PCB?

The Akl ad1 measures 43 × 45.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Akl ad1?

39 components, from 24 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Akl ad1 design files?

From the azonenberg/starshipraider repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Akl ad1 design in my own project?

Yes, under the terms of its BSD-3-Clause license, which azonenberg chose for the repository.

Can I test firmware for the Akl ad1 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in starshipraider

Similar boards