Diffprobe prototype
azonenberg·starshipraider·boards/old-prototypes/diffprobe-prototype/diffprobe-prototype.kicad_pcb
About the Diffprobe prototype PCB
Diffprobe prototype is an open source PCB design by azonenberg, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 41 × 35 mm, with 43 components from 21 distinct parts.
Other key parts include the 296-35573-1. By type, the board carries 14 capacitors, 11 connectors, 10 resistors, 2 ICs, 2 fuses and 2 relays.
It belongs with the displays & leds and test & measurement designs in this gallery.
From the project
Open hardware test equipment
This is the umbrella repo for a lot of my T&M projects. Some will end up in separate repos.
Boards, subsystems, etc are all named after famous electrical engineers who made major contributions to the field of test equipment design.
All instruments are planned to share the same basic platform. Generally speaking, this platform will be:
* 1U rackmount, depth dependent on the specific instrument.
Main components on the Diffprobe prototype
Diffprobe prototype bill of materials (BOM)
43 components, 21 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 296-35573-1 LT3032IDE-5#PBF | DFN_14_0.5MM_4x3MM_DUALPAD_LTC_DE14MA | U1 |
| 1 | 296-35573-1 THS3217 | QFN_16_0.65MM_4x4MM | U2 |
| 3 | SMA | CONN_SMA_EDGE_SAMTEC_SMA_J_P_H_ST_EM1 | P1, P2, P11 |
| 2 | TESTPOINT | TESTPOINT_BARETRACE_328UM | P3, P4 |
| 6 | TESTCLIP | TESTPOINT_SMT_KEYSTONE_5016 | P5, P6, P7, P8, P9, P10 |
| 2 | 250 mA | EIA_0402_RES_NOSILK | F1, F2 |
| 2 | CUI PJ-058BH | CONN_CUI_PJ-058BH_HIPWR_BARREL_NOSLOT | K1, K2 |
| 2 | 490-10592-1 BLM15PX471SN1D | EIA_0402_RES_NOSILK | L1, L2 |
| 2 | 1276-1907-2 4.7 uF 10V | EIA_0805_CAP_NOSILK | C1, C2 |
| 4 | 1276-1907-2 0.47 uF | EIA_0402_CAP_NOSILK | C3, C4, C7, C8 |
| 2 | 1276-1907-2 0.01 uF | EIA_0402_CAP_NOSILK | C5, C6 |
| 2 | 1276-1173-2 10 uF 25V | EIA_1210_CAP_NOSILK | C9, C10 |
| 2 | 1276-1173-2 4.7 uF 10V | EIA_0805_CAP_NOSILK | C11, C12 |
| 2 | 1276-1173-2 0.01 uF | EIA_0402_CAP_NOSILK | C13, C14 |
| 1 | 4.7K 49.9 | EIA_0402_RES_NOSILK | R1 |
| 2 | 10K 49.9 | EIA_0402_RES_NOSILK | R2, R9 |
| 1 | 4.7K DNP | EIA_0402_RES_NOSILK | R3 |
| 3 | 10K DNP | EIA_0402_RES_NOSILK | R4, R5, R6 |
| 1 | 49.9 0 | EIA_0402_RES_NOSILK | R7 |
| 1 | 10K 0 | EIA_0402_RES_NOSILK | R8 |
Show 1 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 10K AT0603T06ECATD | ATC_AT_0603 | R10 |
Diffprobe prototype design files
The KiCad project lives in the azonenberg/starshipraider repository on GitHub; these links point at the commit this page was built from.
Diffprobe prototype: common questions
How big is the Diffprobe prototype PCB?
The Diffprobe prototype measures 41 × 35 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Diffprobe prototype?
43 components, from 21 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Diffprobe prototype design files?
From the azonenberg/starshipraider repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Diffprobe prototype design in my own project?
Yes, under the terms of its BSD-3-Clause license, which azonenberg chose for the repository.
More boards in starshipraider
STM32
Maxwell main
azonenberg
280 × 195 mm987 parts8LBSD-3-Clause193FPGA
Host x1
azonenberg
91 × 83 mm243 parts4LBSD-3-Clause193STM32
Entry afe characterization
azonenberg
75 × 77 mm226 parts4LBSD-3-Clause193STM32
La pod
azonenberg
75 × 71 mm210 parts4LBSD-3-Clause193Iob characterization v02
azonenberg
74.5 × 31 mm123 parts4LBSD-3-Clause193PIC
Diffprobe calibrated prototype
azonenberg
48 × 67.5 mm104 parts4LBSD-3-Clause193STM32
Active host test
azonenberg
100 × 60 mm93 parts4LBSD-3-Clause193Hmcad characterization
azonenberg
57 × 85 mm58 parts4LBSD-3-Clause193Pmod prbs slow
azonenberg
41 × 20 mm43 parts4LBSD-3-Clause193STM32
Akl ad1
azonenberg
43 × 45.8 mm39 parts4LBSD-3-Clause193Integralstick mead
azonenberg
65 × 51.5 mm19 parts4LBSD-3-Clause193
Similar boards
View base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kBM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kStackLink
gusmanb
52.3 × 10.5 mm5 parts2LGPL-3.05.0kLevelShifter
gusmanb
28.3 × 39.8 mm21 parts2LGPL-3.05.0k