Diffprobe calibrated prototype
azonenberg·starshipraider·boards/old-prototypes/diffprobe-calibrated-prototype/diffprobe-calibrated-prototype.kicad_pcb
About the Diffprobe calibrated prototype PCB
Diffprobe calibrated prototype is an open source PIC PCB design by azonenberg, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 48 × 67.5 mm, with 104 components from 53 distinct parts.
Its main chip is the AT30TS74-MA8M-T, from the PIC family. Other key parts include the 296-35573-1, 497-18740-1, 296-47616-1, 296-29865-1 and 296-39066-1. By type, the board carries 46 capacitors, 21 resistors, 12 connectors, 10 ICs, 5 diodes and 3 test points.
It belongs with the displays & leds and test & measurement designs in this gallery.
From the project
Open hardware test equipment
This is the umbrella repo for a lot of my T&M projects. Some will end up in separate repos.
Boards, subsystems, etc are all named after famous electrical engineers who made major contributions to the field of test equipment design.
All instruments are planned to share the same basic platform. Generally speaking, this platform will be:
* 1U rackmount, depth dependent on the specific instrument.
Main components on the Diffprobe calibrated prototype
Diffprobe calibrated prototype bill of materials (BOM)
104 components, 53 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 296-35573-1 MCP1501_DFN | DFN_8_0.5MM_2x2MM | U1 |
| 2 | 296-35573-1 DRV8800_WQFN | QFN_16_0.65MM_4x4MM | U2, U3 |
| 1 | 296-35573-1 AD5752 | TSSOP_24_0.65MM_5MM_EPAD_5x3p2 | U4 |
| 1 | 497-18740-1 THS3217 | QFN_16_0.65MM_4x4MM | U5 |
| 1 | 296-47616-1 AD8675 | SOP_8_0.5MM_3MM | U6 |
| 1 | 296-29865-1 HMC346AMS8GE | SOP_8_0.5MM_3MM_EPAD | U7 |
| 1 | 296-39066-1 LT3032IDE-5#PBF | DFN_14_0.5MM_4x3MM_DUALPAD_LTC_DE14MA | U8 |
| 1 | 296-29865-1 MIC5305-33YML | DFN_6_0.65MM_2x2MM | U9 |
| 1 | AT30TS74-MA8M-T PIC32MM0032GPL028 | QFN_28_0.65MM_6x6MM | U10 |
| 1 | WM1119 XILINX_JTAG | XILINX_JTAG_PTH_MOLEX_0878311420 | J1 |
| 1 | CUI PJ-058BH | CONN_CUI_PJ-058BH_HIPWR_BARREL_NOSLOT | J2 |
| 1 | SAM13196 CUI PJ-058BH | CONN_CUI_PJ-058BH_HIPWR_BARREL_NOSLOT | J3 |
| 1 | WM6754 SMA | CONN_SMA_EDGE_SAMTEC_SMA_J_P_H_ST_EM1 | J4 |
| 2 | SMA | CONN_SMA_EDGE_SAMTEC_SMA_J_P_H_ST_EM1 | J5, J6 |
| 1 | CONN_01X04 | CONN_HEADER_2.54MM_1x4 | J7 |
| 5 | TESTCLIP | TESTPOINT_SMT_KEYSTONE_5016 | P4, P5, P6, P7, P8 |
| 2 | 250 mA | EIA_0402_RES_NOSILK | F1, F2 |
| 2 | AXICOM_HF3_2COIL | RELAY_TE_HF3_2COIL_50OHM | K1, K2 |
| 2 | CONN_01X01 | TESTPOINT_SMT_0.5MM | TP1, TP3 |
| 1 | 36-5016 CONN_01X01 | TESTPOINT_SMT_0.5MM | TP2 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 18-SP4010-02HTG 1N4148 | SOD123 | D1 |
| 4 | 18-SP4010-02HTG GREEN | EIA_0603_LED | D2, D3, D4, D5 |
| 3 | 490-10592-1 BLM15PX471SN1D | EIA_0402_RES_NOSILK | L1, L2, L3 |
| 3 | 1276-1907-2 4.7 uF | EIA_0603_CAP_NOSILK | C1, C2, C45 |
| 8 | 1276-1907-2 0.47 uF | EIA_0402_CAP_NOSILK | C3, C4, C5, C6, C34, C39, C44, C46 |
| 2 | 1276-1907-2 0.1 uF 25V | EIA_0402_CAP_NOSILK | C7, C8 |
| 4 | 1276-1173-2 0.1 uF 25V | EIA_0402_CAP_NOSILK | C9, C10, C31, C33 |
| 3 | 1276-1173-2 0.1 uF | EIA_0402_CAP_NOSILK | C11, C12, C20 |
| 2 | 1276-1173-2 4.7 uF 10V | EIA_0603_CAP_NOSILK | C13, C14 |
| 2 | 1276-1173-2 0.01 uF | EIA_0402_CAP_NOSILK | C15, C16 |
| 2 | 1276-1173-2 10 uF 25V | EIA_1210_CAP_NOSILK | C17, C18 |
| 1 | 1276-1173-2 1 uF | EIA_0402_CAP_NOSILK | C19 |
| 6 | 1276-1173-2 4.7 uF | EIA_0603_CAP_NOSILK | C21, C23, C25, C26, C32, C35 |
| 2 | 1276-1173-2 22 uF 25V | EIA_1812_CAP_NOSILK | C22, C29 |
| 5 | 1276-1173-2 0.47 uF | EIA_0402_CAP_NOSILK | C24, C27, C28, C30, C36 |
| 1 | 565-3675-1 4.7 uF | EIA_0603_CAP_NOSILK | C37 |
| 1 | 1276-1034-1 4.7 uF | EIA_0603_CAP_NOSILK | C38 |
| 1 | 1276-3323-1 4.7 uF | EIA_0603_CAP_NOSILK | C40 |
| 1 | 1276-1034-1 0.47 uF | EIA_0402_CAP_NOSILK | C41 |
| 1 | 1276-3323-1 0.47 uF | EIA_0402_CAP_NOSILK | C42 |
| 1 | 1276-1851-1 4.7 uF | EIA_0603_CAP_NOSILK | C43 |
| 1 | 4.7K 49.9 | EIA_0402_RES_NOSILK | R1 |
| 1 | 10K 49.9 | EIA_0402_RES_NOSILK | R2 |
| 1 | 4.7K 0 | EIA_0402_RES_NOSILK | R3 |
| 6 | 10K 0 | EIA_0402_RES_NOSILK | R4, R5, R8, R9, R18, R20 |
| 1 | 10K 2 | EIA_0402_RES_NOSILK | R6 |
| 1 | 49.9 2 | EIA_0402_RES_NOSILK | R7 |
| 2 | 10K 3.9K | EIA_0402_RES_NOSILK | R10, R11 |
| 1 | 10K 499 | EIA_0402_RES_NOSILK | R12 |
| 1 | 10K 1K | EIA_0402_RES_NOSILK | R13 |
| 3 | 10K 470 | EIA_0402_RES_NOSILK | R14, R15, R16 |
| 1 | 49.9 470 | EIA_0402_RES_NOSILK | R17 |
| 2 | 49.9 0 | EIA_0402_RES_NOSILK | R19, R21 |
Diffprobe calibrated prototype design files
The KiCad project lives in the azonenberg/starshipraider repository on GitHub; these links point at the commit this page was built from.
Diffprobe calibrated prototype: common questions
What microcontroller does the Diffprobe calibrated prototype use?
The Diffprobe calibrated prototype is built around the AT30TS74-MA8M-T, from the PIC family.
How big is the Diffprobe calibrated prototype PCB?
The Diffprobe calibrated prototype measures 48 × 67.5 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Diffprobe calibrated prototype?
104 components, from 53 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Diffprobe calibrated prototype design files?
From the azonenberg/starshipraider repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Diffprobe calibrated prototype design in my own project?
Yes, under the terms of its BSD-3-Clause license, which azonenberg chose for the repository.
Can I test firmware for the Diffprobe calibrated prototype without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in starshipraider
STM32
Maxwell main
azonenberg
280 × 195 mm987 parts8LBSD-3-Clause193FPGA
Host x1
azonenberg
91 × 83 mm243 parts4LBSD-3-Clause193STM32
Entry afe characterization
azonenberg
75 × 77 mm226 parts4LBSD-3-Clause193STM32
La pod
azonenberg
75 × 71 mm210 parts4LBSD-3-Clause193Iob characterization v02
azonenberg
74.5 × 31 mm123 parts4LBSD-3-Clause193STM32
Active host test
azonenberg
100 × 60 mm93 parts4LBSD-3-Clause193Hmcad characterization
azonenberg
57 × 85 mm58 parts4LBSD-3-Clause193Pmod prbs slow
azonenberg
41 × 20 mm43 parts4LBSD-3-Clause193Diffprobe prototype
azonenberg
41 × 35 mm43 parts4LBSD-3-Clause193STM32
Akl ad1
azonenberg
43 × 45.8 mm39 parts4LBSD-3-Clause193Integralstick mead
azonenberg
65 × 51.5 mm19 parts4LBSD-3-Clause193
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379