Integralstick mead
Integralstick mead is an open source PCB design by azonenberg: a 4-layer, 65 × 51.5 mm board with 19 components (15 distinct parts). It is built around the 296-35573-1. Filed under displays & leds and test & measurement.
Open hardware test equipment
This is the umbrella repo for a lot of my T&M projects. Some will end up in separate repos.
Boards, subsystems, etc are all named after famous electrical engineers who made major contributions to the field of test equipment design.
All instruments are planned to share the same basic platform. Generally speaking, this platform will be:
* 1U rackmount, depth dependent on the specific instrument.
Built around
Parts list
19 components, 15 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 296-35573-1 OKL-T_3-W12P-C | MODULE_MURATA_OKL-T3-W12 | U1 |
| 1 | 296-35573-1 FPF2498 | BGA_6_1.3x1.0_0.4MM | U2 |
| 1 | WM1119 CONN_INTEGRALSTICK_FPGA_HOST | CONN_SAMTEC_QSH-060-01-L-D-A | J1 |
| 1 | CONN_SFF8087 | CONN_SFF8087_MOLEX_75783-0140 | J2 |
| 1 | 2A | EIA_0603_RES_NOSILK | F1 |
| 1 | CONN_3_PWROUT | CONN_CUI_PJ-058BH_HIPWR_BARREL_NOSLOT | K1 |
| 1 | Conn_01x03 | CONN_HEADER_2.54MM_1x3 | TP1 |
| 1 | 36-5016 TESTCLIP | TESTPOINT_SMT_KEYSTONE_5016 | TP2 |
| 3 | TESTPAD | TESTPOINT_SMT_0.5MM | TP3, TP4, TP5 |
| 1 | 1276-1907-2 22 uF | EIA_1210_CAP_NOSILK | C1 |
| 1 | 1276-1907-2 100 uF | CAP_AL_6.3MM_SMT | C2 |
| 3 | 1276-1907-2 22 uF 25V | EIA_1812_CAP_NOSILK | C3, C4, C5 |
| 1 | 1.33K | EIA_0402_RES_NOSILK | R1 |
| 1 | 1M | EIA_0402_RES_NOSILK | R2 |
| 1 | 93.1K | EIA_0402_RES_NOSILK | R3 |
More boards in starshipraider
STM32Maxwell main
280 × 195 mm987 parts8LBSD-3-Clause193
FPGAHost x1
91 × 83 mm243 parts4LBSD-3-Clause193
STM32Entry afe characterization
75 × 77 mm226 parts4LBSD-3-Clause193
STM32La pod
75 × 71 mm210 parts4LBSD-3-Clause193
Iob characterization v02
74.5 × 31 mm123 parts4LBSD-3-Clause193
PICDiffprobe calibrated prototype
48 × 67.5 mm104 parts4LBSD-3-Clause193
STM32Active host test
100 × 60 mm93 parts4LBSD-3-Clause193
Hmcad characterization
57 × 85 mm58 parts4LBSD-3-Clause193
Pmod prbs slow
41 × 20 mm43 parts4LBSD-3-Clause193
Diffprobe prototype
41 × 35 mm43 parts4LBSD-3-Clause193
STM32Akl ad1
43 × 45.8 mm39 parts4LBSD-3-Clause193
atopile
AxxAxx
eez-open