Active host test

azonenberg·starshipraider·boards/probes/active-host-test/active-host-test.kicad_pcb

Active host test PCB layout, top view — open source STM32 board by azonenberg

About the Active host test PCB

Active host test is an open source STM32 PCB design by azonenberg, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 100 × 60 mm, with 93 components from 40 distinct parts.

Its main chip is the STM32F103V8Hx, from the STM32 family. Other key parts include the AP6502, LM2611xMF, AP2112K-3.3, FUSB302BMPX and STS232033B102. By type, the board carries 26 capacitors, 24 resistors, 12 test points, 10 ICs, 5 connectors and 4 transistors.

It belongs with the displays & leds and test & measurement designs in this gallery.

From the project

Open hardware test equipment

This is the umbrella repo for a lot of my T&M projects. Some will end up in separate repos.

Boards, subsystems, etc are all named after famous electrical engineers who made major contributions to the field of test equipment design.

All instruments are planned to share the same basic platform. Generally speaking, this platform will be:

* 1U rackmount, depth dependent on the specific instrument.

Main components on the Active host test

AP6502LM2611xMFAP2112K-3.3STM32F103V8HxFUSB302BMPXSTS232033B102STS232050B751STS232120B301LM66100

Active host test bill of materials (BOM)

93 components, 40 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
AP6502
U201, U204
1
LM2611xMF
U202
1
AP2112K-3.3
U203
1
STM32F103V8Hx
U301
1
FUSB302BMPX
U401
1
STS232033B102
U402
1
STS232050B751
U403
1
STS232120B301
U404
1
LM66100
U405
1
Q_PNP_BEC
Q401
1
Q_NPN_BEC
Q402
1
Q_PMOS_GSD
Q403
1
Q_NMOS_GSD
Q404
1
8MHz
Y301
1
Conn_01x05_Male
J101
1
Barrel_Jack
J102
1
Conn_01x06_Male
J103
1
Conn_ARM_JTAG_SWD_10
J301
1
USB_C_Receptacle
J401
3
Thermistor_PTC
TH401, TH402, TH403
Show 20 more
QtyPartRefs
12
TestPoint
TP101, TP102, TP103, TP104, TP105, TP106, TP107, TP108 +4
4
LED
D101, D102, D103, D104
2
22u
L201, L203
2
12u
L202, L204
4
22u
C201, C202, C208, C210
3
10n
C203, C211, C306
2
6n8
C204, C212
6
1u
C205, C209, C213, C304, C310, C402
1
330p
C206
2
47u
C207, C214
2
10p
C301, C302
6
0u1
C303, C305, C307, C308, C309, C401
14
10k
R101, R102, R105, R106, R107, R203, R205, R208 +6
2
1k
R103, R104
2
6k8
R201, R206
1
66k
R202
1
47k
R204
1
44k
R207
1
0R
R401
2
100R
R407, R408

Active host test design files

The KiCad project lives in the azonenberg/starshipraider repository on GitHub; these links point at the commit this page was built from.

Active host test: common questions

What microcontroller does the Active host test use?

The Active host test is built around the STM32F103V8Hx, from the STM32 family.

How big is the Active host test PCB?

The Active host test measures 100 × 60 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Active host test?

93 components, from 40 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Active host test design files?

From the azonenberg/starshipraider repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Active host test design in my own project?

Yes, under the terms of its BSD-3-Clause license, which azonenberg chose for the repository.

Can I test firmware for the Active host test without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

More boards in starshipraider

Similar boards