Entry afe characterization
azonenberg·starshipraider·boards/BLONDEL/entry-afe-characterization/entry-afe-characterization.kicad_pcb
About the Entry afe characterization PCB
Entry afe characterization is an open source STM32 PCB design by azonenberg, published on GitHub under the BSD-3-Clause license. It is a 4-layer board measuring 75 × 77 mm, with 226 components from 120 distinct parts.
Its main chip is the 296-35573-1, from the STM32 family. Other key parts include the 497-18740-1, 296-47616-1, 296-29865-1, 296-39066-1 and AT30TS74-MA8M-T. By type, the board carries 74 capacitors, 67 resistors, 28 test points, 18 ICs, 14 connectors and 11 diodes.
It belongs with the displays & leds and test & measurement designs in this gallery.
From the project
Open hardware test equipment
This is the umbrella repo for a lot of my T&M projects. Some will end up in separate repos.
Boards, subsystems, etc are all named after famous electrical engineers who made major contributions to the field of test equipment design.
All instruments are planned to share the same basic platform. Generally speaking, this platform will be:
* 1U rackmount, depth dependent on the specific instrument.
Main components on the Entry afe characterization
Entry afe characterization bill of materials (BOM)
226 components, 120 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 296-35573-1 LMH6552 | DFN_8_0.5MM_3x3MM | U1 |
| 1 | 296-35573-1 ADL5205 | QFN_40_0.5MM_6x6MM | U2 |
| 1 | 296-35573-1 LM393-DSBGA8 | BGA_8_2x2_DEPOP1_0.5MM_TI_YZR | U3 |
| 1 | 296-35573-1 STM32F031G6U6TR | QFN_28_0.5MM_4x4MM_NOPAD | U4 |
| 1 | 497-18740-1 LTC2664 | QFN_32_0.5MM_5x5MM | U5 |
| 1 | 296-47616-1 LMH6552 | DFN_8_0.5MM_3x3MM | U6 |
| 1 | 296-29865-1 74LVC1G74-XSON8 | DFN_8_0.5MM_2x1MM | U7 |
| 1 | 296-39066-1 TPS54227-DRC | DFN_10_0.5MM_3x3MM | U8 |
| 1 | 296-29865-1 LT3042 | DFN_10_0.5MM_3x3MM | U9 |
| 2 | AT30TS74-MA8M-T LT3042 | DFN_10_0.5MM_3x3MM | U10, U11 |
| 1 | MCP1501T-25E/RW | DFN_8_0.5MM_2x2MM | U12 |
| 1 | LT3093 | DFN_12_0.5MM_3x3MM | U13 |
| 1 | 296-39450-1 PTN78000AAZ | MODULE_TI_PTN78000A | U14 |
| 1 | 296-44379-1 LT3093 | DFN_12_0.5MM_3x3MM | U15 |
| 1 | LT3042 | DFN_10_0.5MM_3x3MM | U16 |
| 1 | TL431ACDBZR | SOT23_3 | U17 |
| 1 | OP07 | SOIC_8_3.9MM | U18 |
| 1 | SSM6N58NU | DFN_6_0.65MM_2x2MM_GDS | Q1 |
| 1 | 2SA2039-TL-E | TO_253 | Q2 |
| 1 | WM1119 SMA | CONN_SMA_EDGE_SAMTEC_SMA_J_P_H_ST_EM1 | J1 |
Show 100 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 6 | SMA | CONN_SMA_EDGE_SAMTEC_SMA_J_P_H_ST_EM1 | J2, J5, J6, J7, J13, J14 |
| 1 | SAM13196 SMA | CONN_SMA_EDGE_SAMTEC_SMA_J_P_H_ST_EM1 | J3 |
| 1 | WM6754 SMA | CONN_SMA_EDGE_SAMTEC_SMA_J_P_H_ST_EM1 | J4 |
| 1 | Conn_01x05 | CONN_HEADER_2.54MM_1x5 | J8 |
| 3 | Conn_01x04 | CONN_HEADER_2.54MM_1x4 | J9, J11, J12 |
| 1 | CONN_3_PWROUT | CONN_CUI_PJ-058BH_HIPWR_BARREL_NOSLOT | J10 |
| 1 | 1A | EIA_0402_RES_NOSILK | F1 |
| 1 | 9202-12-00 | RELAY_COTO_9202 | K1 |
| 21 | TESTPOINT | TESTPOINT_SMT_0.5MM | TP1, TP3, TP5, TP6, TP7, TP10, TP11, TP13 +13 |
| 2 | 36-5016 TESTPOINT | TESTPOINT_SMT_0.5MM | TP2, TP12 |
| 5 | TESTCLIP | TESTPOINT_SMT_KEYSTONE_5016 | TP4, TP8, TP9, TP14, TP15 |
| 1 | 18-SP4010-02HTG PDZ10BGWX | SOD123 | D1 |
| 1 | 18-SP4010-02HTG BAS21GWJ | SOD123 | D2 |
| 1 | 18-SP4010-02HTG NUP1301U | SOT323_3 | D3 |
| 4 | 18-SP4010-02HTG NSR01F30MXT5G | DFN_2_0.62x0.32 | D4, D5, D6, D7 |
| 1 | 18-SP4010-02HTG SMBJ12A | SMB | D8 |
| 3 | 18-SP4010-02HTG GREEN | EIA_0603_LED | D9, D10, D11 |
| 1 | 445-2205-1 MI0603J601R-10 | EIA_0603_INDUCTOR_NOSILK | FB1 |
| 5 | MI0603J601R-10 | EIA_0603_INDUCTOR_NOSILK | FB2, FB3, FB4, FB5, FB6 |
| 1 | 490-10592-1 11 nH | EIA_0402_RES_NOSILK | L1 |
| 1 | 490-10592-1 51 nH | EIA_0603_INDUCTOR_NOSILK | L2 |
| 1 | 490-10592-1 91 nH | EIA_0603_INDUCTOR_NOSILK | L3 |
| 1 | 490-9657-1 4.7 uH | INDUCTOR_YUDEN_NR6028 | L4 |
| 1 | 1276-1907-2 13 pF | EIA_0402_CAP_NOSILK | C1 |
| 1 | 1276-1907-2 27 pF | EIA_0402_CAP_NOSILK | C2 |
| 4 | 1276-1907-2 0.47 uF | EIA_0402_CAP_NOSILK | C3, C7, C8, C46 |
| 2 | 1276-1907-2 0.47 uF 25V | EIA_0402_CAP_NOSILK | C4, C5 |
| 2 | 1276-1907-2 4.7 uF | EIA_0603_CAP_NOSILK | C6, C45 |
| 8 | 1276-1173-2 0.1 uF | EIA_0402_CAP_NOSILK | C9, C13, C14, C23, C24, C25, C26, C32 |
| 6 | 1276-1173-2 4.7 uF | EIA_0805_CAP_NOSILK | C10, C11, C12, C27, C71, C72 |
| 4 | 1276-1173-2 0.47 uF | EIA_0402_CAP_NOSILK | C15, C28, C73, C74 |
| 1 | 1276-1173-2 75 pF | EIA_0402_CAP_NOSILK | C16 |
| 5 | 1276-1173-2 4.7 uF 50V | EIA_0805_CAP_NOSILK | C17, C51, C52, C55, C62 |
| 4 | 1276-1173-2 0.47 uF 25V | EIA_0402_CAP_NOSILK | C18, C19, C50, C67 |
| 4 | 1276-1173-2 1 uF | EIA_0603_CAP_NOSILK | C20, C21, C22, C33 |
| 3 | 1276-1173-2 10 uF | EIA_1210_CAP_NOSILK | C29, C30, C54 |
| 1 | 1276-1173-2 3300 pF | EIA_0603_CAP_NOSILK | C31 |
| 1 | 1276-1907-2 22 uF | EIA_1210_CAP_NOSILK | C34 |
| 1 | 1276-1173-2 22 uF | EIA_1210_CAP_NOSILK | C35 |
| 1 | 1276-1173-2 10 pF | EIA_0402_CAP_NOSILK | C36 |
| 1 | 565-3675-1 0.1 uF | EIA_0402_CAP_NOSILK | C37 |
| 3 | 1276-1034-1 4.7 uF 50V | EIA_0805_CAP_NOSILK | C38, C41, C58 |
| 3 | 1276-1907-2 4.7 uF 50V | EIA_0805_CAP_NOSILK | C39, C44, C57 |
| 2 | 1276-3323-1 4.7 uF 50V | EIA_0805_CAP_NOSILK | C40, C56 |
| 1 | 1276-3323-1 0.47 uF | EIA_0402_CAP_NOSILK | C42 |
| 1 | 1276-1851-1 0.47 uF | EIA_0402_CAP_NOSILK | C43 |
| 1 | 1276-1907-2 2.2 uF | EIA_0603_CAP_NOSILK | C47 |
| 1 | 1276-1173-2 330 pF | EIA_0603_CAP_NOSILK | C48 |
| 1 | 1276-1173-2 220 uF | CAP_AL_6.3MM_SMT | C49 |
| 1 | 1276-1907-2 220 uF | CAP_AL_6.3MM_SMT | C53 |
| 1 | 587-3391-1 0.47 uF 25V | EIA_0402_CAP_NOSILK | C59 |
| 1 | 1276-1851-1 0.47 uF 25V | EIA_0402_CAP_NOSILK | C60 |
| 1 | 1276-1888-1 4.7 uF 50V | EIA_0805_CAP_NOSILK | C61 |
| 1 | 1276-1173-2 22 pF | EIA_0402_CAP_NOSILK | C63 |
| 2 | 1276-1173-2 22 uF | EIA_0805_CAP_NOSILK | C64, C65 |
| 1 | 587-4937-1 0.47 uF 25V | EIA_0402_CAP_NOSILK | C66 |
| 2 | 587-4937-1 0.1 uF | EIA_0402_CAP_NOSILK | C68, C69 |
| 1 | 1276-1851-1 DNP | EIA_0402_CAP_NOSILK | C70 |
| 2 | 4.7K CRCW1206150RFKEAHP | EIA_1206_CAP_NOSILK | R1, R3 |
| 1 | 10K CRCW120637R4FKEAHP | EIA_1206_CAP_NOSILK | R2 |
| 1 | 10K 68 0.1% | EIA_0402_RES_NOSILK | R4 |
| 3 | 10K 330 0.1% | EIA_0402_RES_NOSILK | R5, R6, R8 |
| 1 | 49.9 330 0.1% | EIA_0402_RES_NOSILK | R7 |
| 1 | 10K 9.1K 1% | EIA_0402_RES_NOSILK | R9 |
| 1 | 10K 1K 1% | EIA_0402_RES_NOSILK | R10 |
| 11 | 10K | EIA_0402_RES_NOSILK | R11, R12, R15, R16, R18, R20, R22, R24 +3 |
| 2 | 10K 100 0.1% | EIA_0402_RES_NOSILK | R13, R14 |
| 4 | 49.9 10K | EIA_0402_RES_NOSILK | R17, R19, R21, R23 |
| 2 | 10K 127 0.1% | EIA_0402_RES_NOSILK | R28, R29 |
| 3 | 10K 49.9 | EIA_0402_RES_NOSILK | R30, R31, R32 |
| 1 | 49.9 | EIA_0402_RES_NOSILK | R33 |
| 3 | 10K | EIA_0402_RES_NOSILK | R34, R35, R36 |
| 1 | 1K | EIA_0402_RES_NOSILK | R37 |
| 1 | 22.1K | EIA_0402_RES_NOSILK | R38 |
| 1 | 180K | EIA_0402_RES_NOSILK | R39 |
| 1 | 470 1% | EIA_0402_RES_NOSILK | R40 |
| 1 | 4.7K 1% | EIA_0402_RES_NOSILK | R41 |
| 1 | 49.9K 1% | EIA_0402_RES_NOSILK | R42 |
| 1 | 60.4K 1% | EIA_0402_RES_NOSILK | R43 |
| 1 | 0 | EIA_0402_RES_NOSILK | R44 |
| 1 | 2.7K 1% | EIA_0402_RES_NOSILK | R45 |
| 1 | 33K 1% | EIA_0402_RES_NOSILK | R46 |
| 1 | 6.49K 1% | EIA_0402_RES_NOSILK | R47 |
| 1 | 3.6K 1% | EIA_0402_RES_NOSILK | R48 |
| 1 | 240 8.06K 1% | EIA_0402_RES_NOSILK | R49 |
| 1 | 240 2K 1% | EIA_0402_RES_NOSILK | R50 |
| 1 | 240 11.5K 1% | EIA_0402_RES_NOSILK | R51 |
| 1 | 240 470 1% | EIA_0402_RES_NOSILK | R52 |
| 1 | 240 1K | EIA_0402_RES_NOSILK | R53 |
| 1 | 240 9.09K 1% | EIA_0402_RES_NOSILK | R54 |
| 1 | 240 1K 1% | EIA_0402_RES_NOSILK | R55 |
| 1 | 240 60.4K 1% | EIA_0402_RES_NOSILK | R56 |
| 2 | 240 49.9K 1% | EIA_0402_RES_NOSILK | R57, R58 |
| 3 | 240 20K 0.1% | EIA_0402_RES_NOSILK | R59, R60, R64 |
| 1 | 240 10K 0.1% | EIA_0402_RES_NOSILK | R61 |
| 1 | 240 330 0.1% | EIA_0402_RES_NOSILK | R62 |
| 1 | 240 0 | EIA_0402_RES_NOSILK | R63 |
| 1 | 4.7K 470 | EIA_0402_RES_NOSILK | R65 |
| 1 | 649K 470 | EIA_0402_RES_NOSILK | R66 |
| 1 | 100K 470 | EIA_0402_RES_NOSILK | R67 |
Entry afe characterization design files
The KiCad project lives in the azonenberg/starshipraider repository on GitHub; these links point at the commit this page was built from.
Entry afe characterization: common questions
What microcontroller does the Entry afe characterization use?
The Entry afe characterization is built around the 296-35573-1, from the STM32 family.
How big is the Entry afe characterization PCB?
The Entry afe characterization measures 75 × 77 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Entry afe characterization?
226 components, from 120 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Entry afe characterization design files?
From the azonenberg/starshipraider repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Entry afe characterization design in my own project?
Yes, under the terms of its BSD-3-Clause license, which azonenberg chose for the repository.
Can I test firmware for the Entry afe characterization without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
More boards in starshipraider
STM32
Maxwell main
azonenberg
280 × 195 mm987 parts8LBSD-3-Clause193FPGA
Host x1
azonenberg
91 × 83 mm243 parts4LBSD-3-Clause193STM32
La pod
azonenberg
75 × 71 mm210 parts4LBSD-3-Clause193Iob characterization v02
azonenberg
74.5 × 31 mm123 parts4LBSD-3-Clause193PIC
Diffprobe calibrated prototype
azonenberg
48 × 67.5 mm104 parts4LBSD-3-Clause193STM32
Active host test
azonenberg
100 × 60 mm93 parts4LBSD-3-Clause193Hmcad characterization
azonenberg
57 × 85 mm58 parts4LBSD-3-Clause193Pmod prbs slow
azonenberg
41 × 20 mm43 parts4LBSD-3-Clause193Diffprobe prototype
azonenberg
41 × 35 mm43 parts4LBSD-3-Clause193STM32
Akl ad1
azonenberg
43 × 45.8 mm39 parts4LBSD-3-Clause193Integralstick mead
azonenberg
65 × 51.5 mm19 parts4LBSD-3-Clause193
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k