Pic12-dev
bablokb·pcb-pic-devboard·pic12-dev-pcb.kicad/pic12-dev-pcb.kicad_pcb
About the Pic12-dev PCB
Pic12-dev is an open source PIC PCB design by bablokb, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 27.9 × 40.1 mm, with 16 components from 14 distinct parts.
Its main chip is the PIC16F1829-IP, from the PIC family. By type, the board carries 6 connectors, 4 resistors, 2 diodes, 1 IC, 1 jumper and 1 capacitor.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
Development board for PIC12/PIC16 microcontrollers
Development board for PIC12/PIC16 microcontrollers ==================================================
This repository contains the design-files (Kicad) for three PIC12/PIC16 development boards.
This is a full sized dev-board, see directory pic-dev-board.kicad:
- a PIC12 or a 20-pin PIC16 - configurable pullups or LEDs on GP0-GP5 - two shift-registers with LEDs to output 8-16 bits using two GPs (see project pic-sn74hc595) - a LCD1602 attached to the first shift-register (see project pic-hd44780_lcd) - ICSP programming - all pins broken out to connectors (TRISB/TRISC only available for…

Main components on the Pic12-dev
Pic12-dev bill of materials (BOM)
16 components, 14 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PIC16F1829-IP PIC12F675-ISN | SO-8_3.9x4.9mm_P1.27mm_HandSolder | U1 |
| 1 | PGM-Conn | PinSocket_1x05_P2.54mm_Vertical | J1 |
| 1 | APP_CONN_1 App-Conn1 | PinHeader_1x08_P2.54mm_Vertical | J2 |
| 1 | APP_CONN_2 App-Conn2 | PinHeader_2x08_P2.54mm_Vertical | J3 |
| 1 | Conn_SR | PinHeader_1x05_P2.54mm_Vertical | J4 |
| 1 | CONN_01X03_MALE Conn_01x03_Male | PinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | CONN_BB1 Conn_BB1 | PinHeader_1x02_P2.54mm_Vertical | J6 |
| 1 | Jumper | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | C40942 Micro-USB_Breakout | Micro-USB_Breakout | USB1 |
| 1 | C2296 LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D1 |
| 1 | C84256 LED | LED_1206_3216Metric_Pad1.42x1.75mm_HandSolder | D2 |
| 1 | 100NF 100nF | C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C1 |
| 2 | 1K | R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R1, R2 |
| 2 | 1kΩ | R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4 |
Pic12-dev design files
The KiCad project lives in the bablokb/pcb-pic-devboard repository on GitHub; these links point at the commit this page was built from.
Pic12-dev: common questions
What microcontroller does the Pic12-dev use?
The Pic12-dev is built around the PIC16F1829-IP, from the PIC family.
How big is the Pic12-dev PCB?
The Pic12-dev measures 27.9 × 40.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pic12-dev?
16 components, from 14 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pic12-dev design files?
From the bablokb/pcb-pic-devboard repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Pic12-dev design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which bablokb chose for the repository.
Can I test firmware for the Pic12-dev without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.
More boards in pcb-pic-devboard
Similar boards
PIC
Pslab hardware
fossasia
99 × 53.3 mm187 parts4LApache-2.01.7kPIC
Lens
ervanalb
80 × 80 mm53 parts4LNo license515PIC
Micro 8088
skiselev
152.4 × 101.6 mm71 partsGPL-3.0414PIC
GB-CART256K-A
Gekkio
51.4 × 61 mm17 parts2LCC-BY-4.0379PIC
GB-CARTPP-DIY
Gekkio
100 × 100 mm22 parts2LCC-BY-4.0379PIC
GB-LIVE32
Gekkio
51.4 × 61 mm46 parts4LCC-BY-4.0379