Pic20-dev

bablokb·pcb-pic-devboard·pic20-dev-pcb.kicad/pic20-dev-pcb.kicad_pcb

Pic20-dev PCB layout, top view — open source PIC board by bablokb

About the Pic20-dev PCB

Pic20-dev is an open source PIC PCB design by bablokb, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 42.8 × 35 mm, with 21 components from 16 distinct parts.

Its main chip is the PIC16F1829-IP, from the PIC family. Other key parts include the AMS1117-33. By type, the board carries 8 connectors, 4 resistors, 3 capacitors, 2 ICs, 2 diodes and 1 jumper.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Development board for PIC12/PIC16 microcontrollers

Development board for PIC12/PIC16 microcontrollers ==================================================

This repository contains the design-files (Kicad) for three PIC12/PIC16 development boards.

This is a full sized dev-board, see directory pic-dev-board.kicad:

- a PIC12 or a 20-pin PIC16 - configurable pullups or LEDs on GP0-GP5 - two shift-registers with LEDs to output 8-16 bits using two GPs (see project pic-sn74hc595) - a LCD1602 attached to the first shift-register (see project pic-hd44780_lcd) - ICSP programming - all pins broken out to connectors (TRISB/TRISC only available for…

Pic20-dev, from the project README
From the project README

Main components on the Pic20-dev

PIC16F1829-IPAMS1117-33

Pic20-dev bill of materials (BOM)

21 components, 16 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
PIC16F1829-IP
U1
1
AMS1117-33
TLV1117-33
U2
1
PGM-Conn
J1
1
APP_CONN_1
App_Conn_1
J2
1
APP_CONN_2
App_Conn_2
J3
1
Conn_SR
J4
2
CONN_01X03_MALE
Conn_01x03_Male
J5, J7
1
CONN_BB1
Conn_BB1
J6
1
SPI_Conn
J8
1
Jumper
JP1
1
C40942
Micro-USB
USB1
1
C2296
LED yellow
D1
1
C84256
LED red
D2
1
100NF
100nF
C1
2
C7171
10µF
C2, C3
4
1K
R1, R2, R3, R4

Pic20-dev design files

The KiCad project lives in the bablokb/pcb-pic-devboard repository on GitHub; these links point at the commit this page was built from.

Pic20-dev: common questions

What microcontroller does the Pic20-dev use?

The Pic20-dev is built around the PIC16F1829-IP, from the PIC family.

How big is the Pic20-dev PCB?

The Pic20-dev measures 42.8 × 35 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pic20-dev?

21 components, from 16 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pic20-dev design files?

From the bablokb/pcb-pic-devboard repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Pic20-dev design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which bablokb chose for the repository.

Can I test firmware for the Pic20-dev without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in pcb-pic-devboard

Similar boards