Pic12-dev stripboard

bablokb·pcb-pic-devboard·pic12-dev-stripboard.kicad/pic12-dev-stripboard.kicad_pcb

Pic12-dev stripboard PCB layout, top view — open source PIC board by bablokb

About the Pic12-dev stripboard PCB

Pic12-dev stripboard is an open source PIC PCB design by bablokb, published on GitHub under the CC-BY-SA-4.0 license. It is a 2-layer board measuring 24.1 × 26.7 mm, with 4 components from 4 distinct parts.

Its main chip is the PIC16F1829-IP, from the PIC family. By type, the board carries 2 connectors, 1 IC and 1 capacitor.

It belongs with the dev boards & breakouts designs in this gallery.

From the project

Development board for PIC12/PIC16 microcontrollers

Development board for PIC12/PIC16 microcontrollers ==================================================

This repository contains the design-files (Kicad) for three PIC12/PIC16 development boards.

This is a full sized dev-board, see directory pic-dev-board.kicad:

- a PIC12 or a 20-pin PIC16 - configurable pullups or LEDs on GP0-GP5 - two shift-registers with LEDs to output 8-16 bits using two GPs (see project pic-sn74hc595) - a LCD1602 attached to the first shift-register (see project pic-hd44780_lcd) - ICSP programming - all pins broken out to connectors (TRISB/TRISC only available for…

Pic12-dev stripboard, from the project README
From the project README

Main components on the Pic12-dev stripboard

PIC16F1829-IP

Pic12-dev stripboard bill of materials (BOM)

4 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
PIC16F1829-IP
PIC12F675-ISN
U1
1
PGM-Conn
J1
1
APP_CONN_2
App-Conn
J3
1
100NF
100nF
C1

Pic12-dev stripboard design files

The KiCad project lives in the bablokb/pcb-pic-devboard repository on GitHub; these links point at the commit this page was built from.

Pic12-dev stripboard: common questions

What microcontroller does the Pic12-dev stripboard use?

The Pic12-dev stripboard is built around the PIC16F1829-IP, from the PIC family.

How big is the Pic12-dev stripboard PCB?

The Pic12-dev stripboard measures 24.1 × 26.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Pic12-dev stripboard?

4 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Pic12-dev stripboard design files?

From the bablokb/pcb-pic-devboard repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Pic12-dev stripboard design in my own project?

Yes, under the terms of its CC-BY-SA-4.0 license, which bablokb chose for the repository.

Can I test firmware for the Pic12-dev stripboard without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug PIC firmware against it before you order a PCB.

More boards in pcb-pic-devboard

Similar boards