HardLabs

Wifiaudio tx hardware

BearLaboratory·wifiaudio-tx-hardware

Wifiaudio tx hardware PCB layout, top view — open source ESP32 board by BearLaboratory

About the Wifiaudio tx hardware PCB

Wifiaudio tx hardware is an open source ESP32 PCB design by BearLaboratory, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 35.4 × 27 mm, with 29 components from 17 distinct parts.

Its main chip is the ESP-32S, from the ESP32 family. Other key parts include the tp4056 and ME6211C33M5G-N. By type, the board carries 10 resistors, 6 connectors, 4 diodes, 4 capacitors, 3 ICs and 2 switches.

It belongs with the audio and iot & wireless designs in this gallery.

From the project

WiFi无线麦克风硬件pcb设计

整个系统在组织下分为及个仓库，请根据个人的需求参考： - 语音发射端硬件 - 发射端固件 - 接收端硬件 - 接收端固件 - PC端接收服务 - PCM5102A解码验证模块

整个系统所使用的到的工具； - EDA工具使用开源免费的Kicad - 固件开发使用简单的Arduino

WiFi Audio项目的目的是DIY一个开源且便宜的无线麦克风，辅助自己在拍摄视频时的收音。项目有几个根本点： - 软件键全开源，方便大家对软硬件部分进行针对性的修改； - 整体成本尽量低，为了达到这个目的在硬件设计部分，我舍弃了很多锦上添花的硬件（比如屏幕）； - 基于WiFi，由于我个人想让麦克风能接入网络，因此抛弃了传统的UHF转而投入了WiFi的怀抱，正巧这两年芯片价格飞涨唯一还算正常的是上来乐鑫的ESP32系列芯片，价格便宜功能强大具有WiFi及蓝牙功能，因此选择它作为我们麦克的核心处理芯片。

Main components on the Wifiaudio tx hardware

ESP-32Stp4056ME6211C33M5G-N

Wifiaudio tx hardware bill of materials (BOM)

29 components, 17 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP-32S
U1
1
tp4056
U2
1
ME6211C33M5G-N
U5
1
USB_C_Receptacle_USB2.0
J1
3
Conn_01x01_Female
J2, J3, J6
1
Conn_01x05_Female
J4
1
Conn_01x06_Female
J5
1
SW_DPDT_x2
SW1
1
SW_Push
SW2
1
led-red
D1
3
led-green
D2, D3, D4
2
10uf
C1, C2
2
1uf
C3, C4
4
10k
R1, R2, R8, R9
1
0.4
R3
4
1k
R4, R6, R7, R10
1
1.2K
R5

Wifiaudio tx hardware design files

The KiCad project lives in the BearLaboratory/wifiaudio-tx-hardware repository on GitHub; these links point at the commit this page was built from.

Wifiaudio tx hardware: common questions

What microcontroller does the Wifiaudio tx hardware use?

The Wifiaudio tx hardware is built around the ESP-32S, from the ESP32 family.

How big is the Wifiaudio tx hardware PCB?

The Wifiaudio tx hardware measures 35.4 × 27 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Wifiaudio tx hardware?

29 components, from 17 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Wifiaudio tx hardware design files?

From the BearLaboratory/wifiaudio-tx-hardware repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.

Can I use the Wifiaudio tx hardware design in my own project?

Yes, under the terms of its GPL-3.0 license, which BearLaboratory chose for the repository.

Can I test firmware for the Wifiaudio tx hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards