DSKY driver
benkrasnow·DSKY_EL_replica·PCB - KiCad/DSKY_driver/DSKY_driver.kicad_pcb
About the DSKY driver PCB
DSKY driver is an open source Microchip SAM PCB design by benkrasnow, published on GitHub under the MIT license. It is a board measuring 43 × 92.3 mm, with 44 components from 26 distinct parts.
Its main chip is the ATSAMD21E18A-MUT, from the Microchip SAM family. Other key parts include the HV507PG-G, LT3468ES5#TRMPBFCT-ND, AP2204K-3.3TRG1, AP2204K-5.0TRG1 and CD40109BPWR. By type, the board carries 17 capacitors, 9 ICs, 4 connectors, 4 diodes, 4 resistors and 1 transistor.
It belongs with the displays & leds designs in this gallery.
From the project
Schematic, PCB layout, mechanical CAD, and firmware to create a replica of the DSKY with electroluminescent display

Main components on the DSKY driver
DSKY driver bill of materials (BOM)
44 components, 26 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATSAMD21E18A-MUT ATSAMD21E | QFN32_5MM | IC3 |
| 3 | HV507PG-G HV507 | QFP-96_14x20_Pitch0.8mm | U1, U5, U7 |
| 2 | LT3468ES5#TRMPBFCT-ND LT3468 | SOT-23-5 | U2, U6 |
| 1 | AP2204K-3.3TRG1 AP2204K-3.3 | SOT-23-5 | U3 |
| 1 | AP2204K-5.0TRG1 AP2204K-5.0 | SOT-23-5 | U4 |
| 1 | CD40109BPWR CD40109B | TSSOP-16_4.4x5mm_P0.65mm | U8 |
| 1 | 1301.9317 reset | BTN_KMR2_4.6X2.8 | Q2 |
| 1 | 105133-0011 USB_micro | molex_105133_vertical_USB | X1 |
| 3 | H10806 Conn_15X4 | FX6-60S | J1, J2, J4 |
| 1 | PJ-006B-SMT CUI_power_jack | CUI_PJ-006B-SMT_power_jack | J3 |
| 2 | ATB322524-0110 ATB3225 | ATB3225 | TR1, TR2 |
| 1 | 150060VS75000 green | CHIPLED_0603_NOOUTLINE | PWR1 |
| 2 | B0540W-7-F B0540W | D_SOD-123 | D1, D2 |
| 2 | MMBD5004S-7 MMBD5004S | SOT-23 | D3, D4 |
| 1 | 150060RS75000 red | CHIPLED_0603_NOOUTLINE | L1 |
| 3 | 0805ZC106KAT4A 10uF | 0805-NO | C1, C7, C8 |
| 6 | C0603C105K8RACTU 1uF | 0603-NO | C2, C3, C11, C12, C13, C14 |
| 1 | C5750X6S2W225K250KA 2.2uF | C_2220_5650Metric | C4 |
| 2 | C1608X5R1C685K080AB 6.3uF | 0603-NO | C5, C9 |
| 1 | 885012006008 100pF | 0603-NO | C6 |
Show 6 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | C0603C103K9RACTU 10n | 0603-NO | C10 |
| 3 | C3225X7T2W224K200AA .22u | C_1210_3225Metric | C15, C16, C17 |
| 1 | RC0603FR-071K5L 1.5K | 0603-NO | R1 |
| 1 | RC0603FR-0710ML 10M | 0603-NO | R2 |
| 1 | RC0603FR-07100KL 100K | 0603-NO | R3 |
| 1 | RC0603FR-0710KL 10K | 0603-NO | R4 |
DSKY driver design files
The KiCad project lives in the benkrasnow/DSKY_EL_replica repository on GitHub; these links point at the commit this page was built from.
DSKY driver: common questions
What microcontroller does the DSKY driver use?
The DSKY driver is built around the ATSAMD21E18A-MUT, from the Microchip SAM family.
How big is the DSKY driver PCB?
The DSKY driver measures 43 × 92.3 mm and is 1.6 mm thick.
How many components are on the DSKY driver?
44 components, from 26 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DSKY driver design files?
From the benkrasnow/DSKY_EL_replica repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the DSKY driver design in my own project?
Yes, under the terms of its MIT license, which benkrasnow chose for the repository.
Can I test firmware for the DSKY driver without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Microchip SAM firmware against it before you order a PCB.
More boards in DSKY_EL_replica
Similar boards
Microchip SAM
Microcontroller Expansion Card
FrameworkComputer
26 × 30 mm24 parts2LCC-BY-4.01.1kMicrochip SAM
Taco Raven
VoronDesign
120 × 113 mm349 parts4LGPL-3.01.1kMicrochip SAM
Fpgaboy
Wren6991
50 × 50 mm89 parts4LNo license511Microchip SAM
OpenDropV4
GaudiLabs
124 × 115.4 mm118 parts2LGPL-3.0487Microchip SAM
ModulAdapter universal
GaudiLabs
100 × 69.5 mm45 parts2LGPL-3.0487Microchip SAM
Kira
kiibohd
366.9 × 114.3 mm400 partsCERN-OHL-1.2416