Pd buck converter
bernardopezzo·pd-buck-converter
About the Pd buck converter PCB
Pd buck converter is an open source PCB design by bernardopezzo, published on GitHub. It is a 2-layer board measuring 215.3 × 30.1 mm, with 20 components from 13 distinct parts.
Other key parts include the CH224K, DIP-Switch and SY8303AIC. By type, the board carries 9 resistors, 6 capacitors, 3 ICs and 1 inductor.
It belongs with the power & battery designs in this gallery.
From the project
All-in-one USB Type-C Power Delivery (PD) Sink & 3A Synchronous Buck Converter module designed in KiCad 10. Features WCH CH224K for selectable 5V/9V/12V/15V/20V profiles via DIP switch and Silergy SY8303AIC for high-efficiency adjustable step-down regulation. Includes self-contained JLCPCB SMT libraries, 3D models, and BOM.
An all-in-one compact hardware module combining a USB Type-C Power Delivery (PD) Sink Controller and a 3A Synchronous Step-Down (Buck) DC-DC Converter.
Designed in KiCad 10 using standard JLCPCB SMT components for direct, low-cost assembly.
Please verify the design before using, it is not finished and was not tested.
Modern USB-C chargers (USB-PD / QC adapters) can supply up to 20V at high currents, but most embedded microcontrollers, sensors, and development boards require lower voltages (such as 3.3V, 5V, or 12V).
Main components on the Pd buck converter
Pd buck converter bill of materials (BOM)
20 components, 13 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CH224K WCH(Jiangsu Qin Heng) | CH224K | U1 |
| 1 | DIP-Switch SM Switch | SMXMS-03K-TP | U2 |
| 1 | SY8303AIC Silergy Corp | SY8303AIC | U3 |
| 1 | USB-C Korean Hroparts Elec | TYPE-C-31-M-12 | USBC1 |
| 1 | 3.3uH Sunltech Tech | SLO0530H3R3MTT | L1 |
| 2 | 100nF YAGEO | CC0603KRX7R9BB104 | C1, C6 |
| 2 | 10uF Samsung Electro-Mechanics | CL31B106KBHNNNE | C2, C3 |
| 2 | 22uF FH (Guangdong Fenghua Advanced Tech) | 0805X226M250NT | C4, C5 |
| 4 | 10kΩ UNI-ROYAL(Uniroyal Elec) | 0603WAF1002T5E | R1, R3, R4, R5 |
| 1 | 1kΩ UNI-ROYAL(Uniroyal Elec) | 0603WAF1001T5E | R2 |
| 1 | 100kΩ Potentiometer Nidec | ST-32EA_100K_ohm_104 | R6 |
| 2 | 5.1kΩ UNI-ROYAL(Uniroyal Elec) | 0603WAF5101T5E | R7, R8 |
| 1 | 100kΩ UNI-ROYAL(Uniroyal Elec) | 0603WAF1003T5E | R9 |
Pd buck converter design files
The KiCad project lives in the bernardopezzo/pd-buck-converter repository on GitHub; these links point at the commit this page was built from.
- LayoutPD_Buck.kicad_pcb
- SchematicPD_Buck.kicad_sch
Pd buck converter: common questions
How big is the Pd buck converter PCB?
The Pd buck converter measures 215.3 × 30.1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Pd buck converter?
20 components, from 13 distinct parts. The full bill of materials is listed on this page.
Where can I download the Pd buck converter design files?
From the bernardopezzo/pd-buck-converter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Pd buck converter design in my own project?
The repository has no license, so all rights stay with bernardopezzo. Use it as a reference, and ask the author before reusing the design.
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k