Usb pd buck converter

bernardopezzo·usb-pd-buck-converter

Usb pd buck converter PCB layout, top view — open source board by bernardopezzo

About the Usb pd buck converter PCB

Usb pd buck converter is an open source PCB design by bernardopezzo, published on GitHub. It is a 2-layer board measuring 215.3 × 30.1 mm, with 20 components from 13 distinct parts.

Other key parts include the CH224K, DIP-Switch and SY8303AIC. By type, the board carries 9 resistors, 6 capacitors, 3 ICs and 1 inductor.

It belongs with the power & battery designs in this gallery.

From the project

An all-in-one compact hardware module combining a USB Type-C Power Delivery (PD) Sink Controller and a 3A Synchronous Step-Down (Buck) DC-DC Converter.

An all-in-one compact hardware module combining a USB Type-C Power Delivery (PD) Sink Controller and a 3A Synchronous Step-Down (Buck) DC-DC Converter.

Designed in KiCad 10 using standard JLCPCB SMT components for direct, low-cost assembly.

Please verify the design before using, it is not finished and was not tested.

Modern USB-C chargers (USB-PD / QC adapters) can supply up to 20V at high currents, but most embedded microcontrollers, sensors, and development boards require lower voltages (such as 3.3V, 5V, or 12V).

Main components on the Usb pd buck converter

Usb pd buck converter bill of materials (BOM)

20 components, 13 distinct parts.

QtyPartRefs
1
CH224K
WCH(Jiangsu Qin Heng)
U1
1
DIP-Switch
SM Switch
U2
1
SY8303AIC
Silergy Corp
U3
1
USB-C
Korean Hroparts Elec
USBC1
1
3.3uH
Sunltech Tech
L1
2
100nF
YAGEO
C1, C6
2
10uF
Samsung Electro-Mechanics
C2, C3
2
22uF
FH (Guangdong Fenghua Advanced Tech)
C4, C5
4
10kΩ
UNI-ROYAL(Uniroyal Elec)
R1, R3, R4, R5
1
1kΩ
UNI-ROYAL(Uniroyal Elec)
R2
1
100kΩ Potentiometer
Nidec
R6
2
5.1kΩ
UNI-ROYAL(Uniroyal Elec)
R7, R8
1
100kΩ
UNI-ROYAL(Uniroyal Elec)
R9

Usb pd buck converter design files

The KiCad project lives in the bernardopezzo/usb-pd-buck-converter repository on GitHub; these links point at the commit this page was built from.

Usb pd buck converter: common questions

How big is the Usb pd buck converter PCB?

The Usb pd buck converter measures 215.3 × 30.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Usb pd buck converter?

20 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the Usb pd buck converter design files?

From the bernardopezzo/usb-pd-buck-converter repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Usb pd buck converter design in my own project?

The repository has no license, so all rights stay with bernardopezzo. Use it as a reference, and ask the author before reusing the design.

Similar boards