SofleKeyboard
bhadkamkar9snehil·Sofpad·hardware/r3/reference/Sofle_RGB/PCB/SofleKeyboard.kicad_pcb
About the SofleKeyboard PCB
SofleKeyboard is an open source Nordic nRF PCB design by bhadkamkar9snehil, published on GitHub under the MIT license. It is a 2-layer board measuring 143.4 × 111.8 mm, with 95 components from 18 distinct parts.
Its main chip is the MDBT50Q-1MV2, from the Nordic nRF family. By type, the board carries 37 diodes, 30 switches, 8 connectors, 8 jumpers, 2 resistors and 1 IC.
It belongs with the keyboards, iot & wireless and power & battery designs in this gallery.
From the project
A sofle keyboard merged into a single shell with a trackpad
A wireless, split-layout mechanical keyboard in one piece: two Sofle RGB boards in an Alice-style tilted case, with a trackpad between the thumbs, one screen and one battery.
Sofpad is a keyboard for the sofa and the desk. Two original Sofle RGB PCBs sit in a single printed shell, each tilted 12° like an Alice keyboard, so your hands rest naturally and the keyboard stays one object you can carry and lay on your lap. Between the thumb clusters sits a large trackpad that either thumb reaches, so the mouse never needs a separate hand movement.

Main components on the SofleKeyboard
SofleKeyboard bill of materials (BOM)
95 components, 18 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MDBT50Q-1MV2 ProMicro | ProMicro | U1 |
| 1 | LED | LED | J1 |
| 1 | 4PIN | MJ-4PP-9 | J2 |
| 1 | OLED | OLED_4Pin | J3 |
| 1 | key leds | 3x1header | J4 |
| 1 | backlight sel | 3x1header | J5 |
| 1 | indicator bypass | 3x1header | J6 |
| 2 | i2c_pin | 1pin_conn | P1, P2 |
| 8 | Jumper_NO_Small | Jumper | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 |
| 1 | SW_RST | TACT_SWITCH_TVBP06 | RSW1 |
| 29 | SW_PUSH-MX_W_LED | SK6812MINI_and_cherry | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8 +21 |
| 1 | Rotary_Encoder_Switch | RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm-keebio_modified | SW25 |
| 2 | HOLE | M2_HOLE_PCB | TH1, TH2 |
| 5 | HOLE | HOLE_M2_TH | TH3, TH4, TH5, TH6, TH7 |
| 1 | jumper | jumper_data | W1 |
| 30 | D | crkbd-diode | D1, D2, D3, D4, D5, D6, D7, D8 +22 |
| 7 | LED_sk2812_SM | SK6812MINI_underglow_dev | D31, D32, D33, D34, D35, D36, D37 |
| 2 | 5.1K R | RESISTOR_mini | R1, R2 |
SofleKeyboard design files
The KiCad project lives in the bhadkamkar9snehil/Sofpad repository on GitHub; these links point at the commit this page was built from.
SofleKeyboard: common questions
What microcontroller does the SofleKeyboard use?
The SofleKeyboard is built around the MDBT50Q-1MV2, from the Nordic nRF family.
How big is the SofleKeyboard PCB?
The SofleKeyboard measures 143.4 × 111.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the SofleKeyboard?
95 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SofleKeyboard design files?
From the bhadkamkar9snehil/Sofpad repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the SofleKeyboard design in my own project?
Yes, under the terms of its MIT license, which bhadkamkar9snehil chose for the repository.
Can I test firmware for the SofleKeyboard without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
More boards in Sofpad
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381