Carrier chk
bhadkamkar9snehil·Sofpad·hardware/r3/pcb/carrier/carrier_chk.kicad_pcb
About the Carrier chk PCB
Carrier chk is an open source Nordic nRF PCB design by bhadkamkar9snehil, published on GitHub under the MIT license. It is a 4-layer board measuring 62 × 28 mm, with 44 components from 30 distinct parts.
Its main chip is the MDBT50Q-1MV2, from the Nordic nRF family. Other key parts include the BQ24074RGTR, TPS62740DSST, DRV2605LDGSR, LIS3DHTR and USBLC6-2SC6. By type, the board carries 16 resistors, 12 capacitors, 8 connectors, 6 ICs, 1 switch and 1 inductor.
It belongs with the keyboards, iot & wireless and power & battery designs in this gallery.
From the project
A sofle keyboard merged into a single shell with a trackpad
A wireless, split-layout mechanical keyboard in one piece: two Sofle RGB boards in an Alice-style tilted case, with a trackpad between the thumbs, one screen and one battery.
Sofpad is a keyboard for the sofa and the desk. Two original Sofle RGB PCBs sit in a single printed shell, each tilted 12° like an Alice keyboard, so your hands rest naturally and the keyboard stays one object you can carry and lay on your lap. Between the thumb clusters sits a large trackpad that either thumb reaches, so the mouse never needs a separate hand movement.

Main components on the Carrier chk
Carrier chk bill of materials (BOM)
44 components, 30 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MDBT50Q-1MV2 | Raytac_MDBT50Q | U1 |
| 1 | BQ24074RGTR | VQFN-16-1EP_3x3mm_P0.5mm_EP1.6x1.6mm | U2 |
| 1 | TPS62740DSST | WSON-12-1EP_3x2mm_P0.5mm_EP1x2.65 | U3 |
| 1 | DRV2605LDGSR | MSOP-10_3x3mm_P0.5mm | U4 |
| 1 | LIS3DHTR | LGA-16_3x3mm_P0.5mm_LayoutBorder3x5y | U5 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U6 |
| 1 | GCT USB4085-GF-A | USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | Battery S2B-PH-SM4-TB | JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J2 |
| 1 | Cell NTC SM02B-SRSS-TB | JST_SH_SM02B-SRSS-TB_1x02-1MP_P1.00mm_Horizontal | J3 |
| 1 | LRA SM02B-SRSS-TB | JST_SH_SM02B-SRSS-TB_1x02-1MP_P1.00mm_Horizontal | J4 |
| 1 | Screen S8B-PH-SM4-TB | JST_PH_S8B-PH-SM4-TB_1x08-1MP_P2.00mm_Horizontal | J5 |
| 1 | TPS65 breakout SM06B-SRSS-TB | JST_SH_SM06B-SRSS-TB_1x06-1MP_P1.00mm_Horizontal | J6 |
| 1 | Left FFC FH12-16S-0.5SH | Hirose_FH12-16S-0.5SH_1x16-1MP_P0.50mm_Horizontal | J7 |
| 1 | Right FFC FH12-16S-0.5SH | Hirose_FH12-16S-0.5SH_1x16-1MP_P0.50mm_Horizontal | J8 |
| 1 | C&K PCM12SMTR | SW_SPDT_PCM12 | SW1 |
| 1 | 2.2UH 2.2uH | L_0805_2012Metric | L1 |
| 3 | 1UF 1uF | C_0402_1005Metric | C1, C8, C9 |
| 5 | 10UF 10uF | C_0603_1608Metric | C2, C3, C5, C6, C12 |
| 1 | 4.7UF 4.7uF | C_0603_1608Metric | C4 |
| 3 | 100NF 100nF | C_0402_1005Metric | C7, C10, C11 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 5.1K 5.1k | R_0402_1005Metric | R1, R2 |
| 1 | 2.0K 2.0k | R_0402_1005Metric | R3 |
| 1 | 3.3K 3.3k | R_0402_1005Metric | R4 |
| 1 | 47K 47k | R_0402_1005Metric | R5 |
| 1 | 3.0K 3.0k | R_0402_1005Metric | R6 |
| 1 | 100K 100k | R_0402_1005Metric | R7 |
| 2 | 4.7K 4.7k | R_0402_1005Metric | R8, R9 |
| 2 | 1M | R_0402_1005Metric | R10, R11 |
| 1 | 10K 10k | R_0402_1005Metric | R12 |
| 4 | 470K 470k | R_0402_1005Metric | R13, R14, R15, R16 |
Carrier chk design files
The KiCad project lives in the bhadkamkar9snehil/Sofpad repository on GitHub; these links point at the commit this page was built from.
Carrier chk: common questions
What microcontroller does the Carrier chk use?
The Carrier chk is built around the MDBT50Q-1MV2, from the Nordic nRF family.
How big is the Carrier chk PCB?
The Carrier chk measures 62 × 28 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Carrier chk?
44 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Carrier chk design files?
From the bhadkamkar9snehil/Sofpad repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the Carrier chk design in my own project?
Yes, under the terms of its MIT license, which bhadkamkar9snehil chose for the repository.
Can I test firmware for the Carrier chk without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.
More boards in Sofpad
Similar boards
Nordic nRF
Keyboard
byrantech
262.5 × 109.6 mm206 parts2LMIT4.3kNordic nRF
TOTEM
GEIGEIGEIST
258.8 × 94.4 mm85 parts2LCERN-OHL-P-2.02.0kNordic nRF
Pixl.js
solosky
40 × 23 mm45 parts4LGPL-2.01.4kNordic nRF
Board hl15-latest
dennisss
61 × 37 mm14 parts2LApache-2.0381Nordic nRF
Management
dennisss
101 × 31.5 mm50 parts2LApache-2.0381Nordic nRF
Board
dennisss
363 × 128 mm420 parts4LApache-2.0381