Carrier

bhadkamkar9snehil·Sofpad·hardware/r3/pcb/carrier/carrier.kicad_pcb

Carrier PCB layout, top view — open source Nordic nRF board by bhadkamkar9snehil

About the Carrier PCB

Carrier is an open source Nordic nRF PCB design by bhadkamkar9snehil, published on GitHub under the MIT license. It is a 4-layer board measuring 62 × 28 mm, with 44 components from 30 distinct parts.

Its main chip is the MDBT50Q-1MV2, from the Nordic nRF family. Other key parts include the BQ24074RGTR, TPS62740DSST, DRV2605LDGSR, LIS3DHTR and USBLC6-2SC6. By type, the board carries 16 resistors, 12 capacitors, 8 connectors, 6 ICs, 1 switch and 1 inductor.

It belongs with the keyboards, iot & wireless and power & battery designs in this gallery.

From the project

A sofle keyboard merged into a single shell with a trackpad

A wireless, split-layout mechanical keyboard in one piece: two Sofle RGB boards in an Alice-style tilted case, with a trackpad between the thumbs, one screen and one battery.

Sofpad is a keyboard for the sofa and the desk. Two original Sofle RGB PCBs sit in a single printed shell, each tilted 12° like an Alice keyboard, so your hands rest naturally and the keyboard stays one object you can carry and lay on your lap. Between the thumb clusters sits a large trackpad that either thumb reaches, so the mouse never needs a separate hand movement.

Carrier, from the project README
From the project README

Main components on the Carrier

Carrier bill of materials (BOM)

44 components, 30 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
MDBT50Q-1MV2
U1
1
BQ24074RGTR
U2
1
TPS62740DSST
U3
1
DRV2605LDGSR
U4
1
LIS3DHTR
U5
1
USBLC6-2SC6
U6
1
GCT USB4085-GF-A
J1
1
Battery S2B-PH-SM4-TB
J2
1
Cell NTC SM02B-SRSS-TB
J3
1
LRA SM02B-SRSS-TB
J4
1
Screen S8B-PH-SM4-TB
J5
1
TPS65 breakout SM06B-SRSS-TB
J6
1
Left FFC FH12-16S-0.5SH
J7
1
Right FFC FH12-16S-0.5SH
J8
1
C&K PCM12SMTR
SW1
1
2.2UH
2.2uH
L1
3
1UF
1uF
C1, C8, C9
5
10UF
10uF
C2, C3, C5, C6, C12
1
4.7UF
4.7uF
C4
3
100NF
100nF
C7, C10, C11
Show 10 more
QtyPartRefs
2
5.1K
5.1k
R1, R2
1
2.0K
2.0k
R3
1
3.3K
3.3k
R4
1
47K
47k
R5
1
3.0K
3.0k
R6
1
100K
100k
R7
2
4.7K
4.7k
R8, R9
2
1M
R10, R11
1
10K
10k
R12
4
470K
470k
R13, R14, R15, R16

Carrier design files

The KiCad project lives in the bhadkamkar9snehil/Sofpad repository on GitHub; these links point at the commit this page was built from.

Carrier: common questions

What microcontroller does the Carrier use?

The Carrier is built around the MDBT50Q-1MV2, from the Nordic nRF family.

How big is the Carrier PCB?

The Carrier measures 62 × 28 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Carrier?

44 components, from 30 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Carrier design files?

From the bhadkamkar9snehil/Sofpad repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Carrier design in my own project?

Yes, under the terms of its MIT license, which bhadkamkar9snehil chose for the repository.

Can I test firmware for the Carrier without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug Nordic nRF firmware against it before you order a PCB.

More boards in Sofpad

Similar boards