Stm32logger

Birb-jpg·stm32logger

Stm32logger PCB layout, top view — open source STM32 board by Birb-jpg

About the Stm32logger PCB

Stm32logger is an open source STM32 PCB design by Birb-jpg, published on GitHub. It is a 2-layer board measuring 30 × 30 mm, with 59 components from 36 distinct parts.

Its main chip is the STM32U535CBTX, from the STM32 family. Other key parts include the USBLC6-2SC6, TPS7A0533PDBZ, LM66100DCK, W25Q128JVP and BMP581. By type, the board carries 24 capacitors, 10 ICs, 10 test points, 8 resistors, 2 connectors and 1 crystal.

From the project

A 1in.^2 STM32 based flight data logger.

Main components on the Stm32logger

Stm32logger bill of materials (BOM)

59 components, 36 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
STM32U535CBTX
STM32U535CBTx
U1
1
USBLC6-2SC6
U2
1
TPS7A0533PDBZ
U3
2
LM66100DCK
U4, U10
1
W25Q128JVP
U5
1
BMP581
U6
1
MMC5983MA
U7
1
ADXL375
U8
1
LSM6DSV16X
U9
1
32.768KHZ
32.768KHz
Y1
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J1
1
CONN_01X02_PIN
Conn_01x02_Pin
J2
1
Polyfuse_Small
F1
1
BOOT0
SW1
1
+3V3 TP
TP1
1
VBATT TP
TP2
1
VBUS
TP3
1
VOUT
TP4
1
ADC1
TP5
1
PA3
TP6
Show 16 more
QtyPartRefs
1
PA4
TP7
1
PA5
TP8
1
PA6
TP9
1
PA7
TP10
1
LED_Blue
D1
1
220R @ 100MHz
FB1
5
10UF
10uF
C1, C2, C3, C15, C16
12
100NF
100nF
C4, C5, C6, C7, C11, C13, C17, C18 +4
1
4.7UF
4.7uF
C8
2
20PF
20pF
C9, C10
1
10NF
10nF
C12
3
1UF
1uF
C14, C19, C20
2
5.1KR
5.1kR
R1, R2
2
22R
R3, R4
1
47KR
47kR
R5
3
100R
R6, R7, R8

Stm32logger design files

The KiCad project lives in the Birb-jpg/stm32logger repository on GitHub; these links point at the commit this page was built from.

Stm32logger: common questions

What microcontroller does the Stm32logger use?

The Stm32logger is built around the STM32U535CBTX, from the STM32 family.

How big is the Stm32logger PCB?

The Stm32logger measures 30 × 30 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Stm32logger?

59 components, from 36 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Stm32logger design files?

From the Birb-jpg/stm32logger repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Stm32logger design in my own project?

The repository has no license, so all rights stay with Birb-jpg. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Stm32logger without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.

Similar boards