5 open source boards using the TPS7A0533PDBZ
Real designs built with the TPS7A0533PDBZ, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
NPulse v4
N-Pulse
39.8 × 72.5 mm157 parts4LCC-BY-4.00STM32
Stm32logger
Birb-jpg
30 × 30 mm59 parts2LNo license0Microchip SAM
Microchip-ATSAME54-Development-Board
Albinjm72
44.7 × 76.6 mm44 parts2LCERN-OHL-S-2.00Nref ports one
cetola
88 × 35.9 mm146 parts4LNo license0Lora nicerf hat
charlieh0tel
65 × 30.5 mm9 parts4LBSD-3-Clause0
How designs wire the TPS7A0533PDBZ
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TPS7A0533PDBZ connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 100 nF).
- The VI pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 100% | — |
| VOpin 2 | Connected to: 3.3V 80% · a signal 20% |
|
| VIpin 3 | Connected to: 5V 60% · a signal 40% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Microchip-ATSAME54-Development-Board by Albinjm72, Stm32logger by Birb-jpg, Nref ports one by cetola and Lora nicerf hat by charlieh0tel.
The TPS7A0533PDBZ in open source designs
The gallery holds 5 open source boards using the TPS7A0533PDBZ from 5 GitHub repositories; a typical one measures about 44.7 × 35.8 mm and carries around 59 components.
60% use four copper layers or more, and 60% carry an open source license.
The most starred is NPulse v4 by N-Pulse.
Microcontrollers on boards using the TPS7A0533PDBZ
What boards using the TPS7A0533PDBZ are built for
TPS7A0533PDBZ: common questions
Where can I find a TPS7A0533PDBZ reference design?
Each of the 5 boards on this page is a real design using the TPS7A0533PDBZ. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the TPS7A0533PDBZ VO pin?
The VO pin has a decoupling capacitor on 5 of 5 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 5 open source designs using the TPS7A0533PDBZ.
What decoupling capacitors do designs use on the TPS7A0533PDBZ VI pin?
The VI pin has a decoupling capacitor on 4 of 5 designs, most often 1 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the TPS7A0533PDBZ.
Which microcontrollers do boards using the TPS7A0533PDBZ use?
Most are built on STM32 (2) and Microchip SAM (1).
How big is a typical board using the TPS7A0533PDBZ?
The median is 44.7 × 35.8 mm, and 40% are two-layer designs.
What is the most popular open source board using the TPS7A0533PDBZ?
By GitHub stars, NPulse v4 by N-Pulse, with 0 stars.
Can I simulate one of these boards using the TPS7A0533PDBZ before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.