Future sanchar mesh

birbh·future_sanchar-mesh·pcb_sanchar/sanchar.kicad_pcb

Future sanchar mesh PCB layout, top view — open source ESP32 board by birbh

About the Future sanchar mesh PCB

Future sanchar mesh is an open source ESP32 PCB design by birbh, published on GitHub. It is a 2-layer board measuring 100.1 × 51.4 mm, with 24 components from 18 distinct parts.

Its main chip is the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family. Other key parts include the ER_OLEDM0.91_1X-I2C, AMS1117-3.3 and MAX98357A. By type, the board carries 7 capacitors, 4 ICs, 4 switches, 2 resistors, 1 module and 1 connector.

It belongs with the audio, displays & leds and power & battery designs in this gallery.

From the project

Future_sanchar-jaal is a custom, open-source digital walkie-talkie powered by ESP32-S3. Unlike traditional analog radios those suffer from static or require a central router to work, this device uses the ESP-NOW v2 protocol to create a direct p2p 2.4GHz network.

Future_sanchar-jaal is a custom, open-source digital walkie-talkie powered by ESP32-S3. Unlike traditional analog radios those suffer from static or require a central router to work, this device uses the ESP-NOW v2 protocol to create a direct p2p 2.4GHz network.

Recently my country Nepal suffered a devastating flood which ruined so many human lives. So I thought that if I could make a Lo-Ra walkie-talkie, I could warn the people using the walkie-talkie along the long distance. Also in Nepal, due to difficult geography, the cellular network coverage could be unreliable when trekking and…

Future sanchar mesh, from the project README
From the project README

Main components on the Future sanchar mesh

Future sanchar mesh bill of materials (BOM)

24 components, 18 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-S3-WROOM-1U-N16R8
U1
1
ER_OLEDM0.91_1X-I2C
ER_OLEDM0.91_1x-I2C
U2
1
AMS1117-3.3
U3
1
MAX98357A
U4
1
INMP441 Microphone
M1
1
CONN_01X04_PIN
Conn_01x04_Pin
J1
1
Battery_Cell
BT1
1
Speaker
LS1
1
R_Potentiometer_MountingPin
RV1
3
SW_Push
SW1, SW3-boot, SW4-reset
1
SW_SPDT
SW2
1
TP4056_CM
TP4056_cm
TP1
1
WS2812B
D1
3
10µF
C1, C2, C5
3
100NF
100nf
C3, C4, C6
1
1µF
C7
1
100kΩ
R1
1
10kΩ
R2

Future sanchar mesh design files

The KiCad project lives in the birbh/future_sanchar-mesh repository on GitHub; these links point at the commit this page was built from.

Future sanchar mesh: common questions

What microcontroller does the Future sanchar mesh use?

The Future sanchar mesh is built around the ESP32-S3-WROOM-1U-N16R8, from the ESP32 family.

How big is the Future sanchar mesh PCB?

The Future sanchar mesh measures 100.1 × 51.4 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Future sanchar mesh?

24 components, from 18 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Future sanchar mesh design files?

From the birbh/future_sanchar-mesh repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Future sanchar mesh design in my own project?

The repository has no license, so all rights stay with birbh. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Future sanchar mesh without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards