DRV BREAKOUT BOARD
About the DRV BREAKOUT BOARD
DRV BREAKOUT BOARD is an open source PCB design by bismarx-v1, published on GitHub. It is a 2-layer board measuring 18.8 × 21.4 mm, with 3 components from 3 distinct parts.
Other key parts include the DRV8874PWPR. By type, the board carries 2 connectors and 1 IC.
It belongs with the robotics & motion and dev boards & breakouts designs in this gallery.
From the project
OLD REPO, FOR NEW UPDATES VISIT: https://github.com/bismarx-v1/Sumec-MiniSumo-master
- -CODE- Contains the source code for the MiniSumo robot, including firmware for microcontrollers, sensor libraries and control diagrams.
- -DOCS- Includes robot documentation, rules for specific tournaments, and extras.
- -PCB- Includes PCB files, we are using KiCAD for PCB designing.
- Mouser Electronics - GM Electronics - TME - BotLand
Email - savvapopov1804@gmail.com LinkedIn - www.linkedin.com/in/savva-popov
Main components on the DRV BREAKOUT BOARD
DRV BREAKOUT BOARD bill of materials (BOM)
3 components, 3 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | DRV8874PWPR | DRV8874 | IC1 |
| 1 | XT30PW-M Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 1 | Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J2 |
DRV BREAKOUT BOARD design files
The KiCad project lives in the bismarx-v1/Sumec-MiniSumo repository on GitHub; these links point at the commit this page was built from.
DRV BREAKOUT BOARD: common questions
How big is the DRV BREAKOUT BOARD?
The DRV BREAKOUT BOARD measures 18.8 × 21.4 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DRV BREAKOUT BOARD?
3 components, from 3 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the DRV BREAKOUT BOARD design files?
From the bismarx-v1/Sumec-MiniSumo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the DRV BREAKOUT BOARD design in my own project?
The repository has no license, so all rights stay with bismarx-v1. Use it as a reference, and ask the author before reusing the design.
More boards in Sumec-MiniSumo
Similar boards
Cube batteryboard
willem-pennings
95 × 95 mm4 parts2LGPL-3.01.1k
Radioberry preamp
pa3gsb
65 × 56 mm137 parts2LNo license675
Hat
65 × 56 mm81 parts2LNo license675
Radioberry juice
65 × 56 mm87 parts2LNo license675
Sram dev board
Wren6991
50 × 50 mm12 parts2LNo license508
ESP32
Chrismettal
66.4 × 48.1 mm7 parts2LCC-BY-SA-4.0446