HardLabs

RC-5 Remote Controler

bismarx-v1·Sumec-MiniSumo·-PCB-/_archive_old/RC-5 Remote Controler/RC-5 Remote Controler.kicad_pcb

RC-5 Remote Controler PCB layout, top view — open source ESP32 board by bismarx-v1
Simulate this board

About the RC-5 Remote Controler PCB

RC-5 Remote Controler is an open source ESP32 PCB design by bismarx-v1, published on GitHub. It is a 2-layer board measuring 40 × 59.8 mm, with 11 components from 8 distinct parts.

Its main chip is the ESP32-WROOM-32E-N16, from the ESP32 family. By type, the board carries 5 resistors, 4 switches, 1 module and 1 diode.

It belongs with the robotics & motion designs in this gallery.

From the project

OLD REPO, FOR NEW UPDATES VISIT: https://github.com/bismarx-v1/Sumec-MiniSumo-master

- -CODE- Contains the source code for the MiniSumo robot, including firmware for microcontrollers, sensor libraries and control diagrams.

- -DOCS- Includes robot documentation, rules for specific tournaments, and extras.

- -PCB- Includes PCB files, we are using KiCAD for PCB designing.

- Mouser Electronics - GM Electronics - TME - BotLand

Email - savvapopov1804@gmail.com LinkedIn - www.linkedin.com/in/savva-popov

Main components on the RC-5 Remote Controler

ESP32-WROOM-32E-N16

RC-5 Remote Controler bill of materials (BOM)

11 components, 8 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-WROOM-32E-N16
Arduino_Nano_v3.x
A1
1
SW_DPDT_X2
SW_Push
SW1
3
SW_Push
SW2, SW3, SW4
1
LED
D1
1
10K
330R
R1
2
10K
10k
R2, R4
1
45K
10k
R3
1
100K
10k
R5

RC-5 Remote Controler design files

The KiCad project lives in the bismarx-v1/Sumec-MiniSumo repository on GitHub; these links point at the commit this page was built from.

RC-5 Remote Controler: common questions

What microcontroller does the RC-5 Remote Controler use?

The RC-5 Remote Controler is built around the ESP32-WROOM-32E-N16, from the ESP32 family.

How big is the RC-5 Remote Controler PCB?

The RC-5 Remote Controler measures 40 × 59.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RC-5 Remote Controler?

11 components, from 8 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the RC-5 Remote Controler design files?

From the bismarx-v1/Sumec-MiniSumo repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the RC-5 Remote Controler design in my own project?

The repository has no license, so all rights stay with bismarx-v1. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the RC-5 Remote Controler without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Sumec-MiniSumo

Similar boards