HardLabs

QRE MiniBoardV2

bismarx-v1·Sumec-MiniSumo-HW·main_hw/QRE_MINIBOARD_V2/QRE_MiniBoardV2.kicad_pcb

QRE MiniBoardV2 PCB layout, top view — open source board by bismarx-v1
Simulate this board

About the QRE MiniBoardV2 PCB

QRE MiniBoardV2 is an open source PCB design by bismarx-v1, published on GitHub. It is a 2-layer board measuring 97 × 16.5 mm, with 7 components from 4 distinct parts.

Other key parts include the QRE1113. By type, the board carries 4 resistors, 2 ICs and 1 connector.

It belongs with the robotics & motion designs in this gallery.

From the project

SUMEC is a MiniSumo robot designed by SPŠ na Proseku students. This repository contains hardware source for this project - PCB files and other electronics.

SUMEC - is an autonomous MiniSumo robot, that is designed to compete in MiniSumo competitions. MiniSumo robots are small 100mmx100mm autonomous robots that combine electronics, software and mechanics into one project, their task it to push their opponent out of a ring. This project is led and managed by SPŠ na Proseku students.

Project Contributors: - Antonín Havlík - Head Software Developer - Šimon Šťastný - Head Mechanical Designer and Developer - Jonáš Jarý - Mechanical Developer, Software and Hardware Development Assistant - Lukáš Houdek - Mechanical Designer and Developer, 3D Printing…

Main components on the QRE MiniBoardV2

QRE1113

QRE MiniBoardV2 bill of materials (BOM)

7 components, 4 distinct parts — part numbers from the project's BOM.

QtyPartRefs
2
QRE1113
U1, U2
1
Conn_01x04_Pin
J1
2
10k
R1, R2
2
100R
R3, R4

QRE MiniBoardV2 design files

The KiCad project lives in the bismarx-v1/Sumec-MiniSumo-HW repository on GitHub; these links point at the commit this page was built from.

QRE MiniBoardV2: common questions

How big is the QRE MiniBoardV2 PCB?

The QRE MiniBoardV2 measures 97 × 16.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the QRE MiniBoardV2?

7 components, from 4 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the QRE MiniBoardV2 design files?

From the bismarx-v1/Sumec-MiniSumo-HW repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the QRE MiniBoardV2 design in my own project?

The repository has no license, so all rights stay with bismarx-v1. Use it as a reference, and ask the author before reusing the design.

More boards in Sumec-MiniSumo-HW

Similar boards