8 open source boards using the QRE1113
Real designs built with the QRE1113, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
MainBoard
sabas1080
194 × 36 mm78 parts2LNo license2STM32
AratMicro
vorlaxen-labs
80 × 87.6 mm102 parts4LMIT1AVR/Arduino
IR array sensor
Vulcan758
131.5 × 133.3 mm57 parts2LNo license0Morro dragon v2
OPRobots
59.4 × 99.9 mm65 parts2LGPL-2.07AVR/Arduino
IR array sensor - Copy
Vulcan758
113.5 × 138 mm57 parts2LNo license0SMB - 100 - A
Rudolfs-Pakalns
92 × 49.5 mm39 parts2LNo license0QRE MiniBoards
bismarx-v1
90 × 11.1 mm7 parts2LNo license3QRE MiniBoardV2
bismarx-v1
97 × 16.5 mm7 parts2LNo license3
How designs wire the QRE1113
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the QRE1113 connects to, and the resistors, capacitors and other passives placed on it.
- The A pin has a pull-up to 3.3V on 5 of 6 designs, most often 100 Ω (then 220 Ω).
- The K pin is tied to GND on 5 of 6 designs.
- Pin 4 is tied to GND on 5 of 6 designs.
- Pin 3 has a pull-up to 3.3V on 3 of 6 designs, most often 10 kΩ (then 47 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Apin 1 | Connected to: Signal 83% · 3.3V 17% |
|
| Kpin 2 | Connected to: GND 83% · a signal 17% | — |
| Pin 3 | Connected to: Signal 83% · 3.3V 17% |
|
| Pin 4 | Connected to: GND 83% · a signal 17% | — |
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Morro dragon v2 by OPRobots, QRE MiniBoards by bismarx-v1, MainBoard by sabas1080 and AratMicro by vorlaxen-labs.
The QRE1113 in open source designs
The gallery holds 8 open source boards using the QRE1113 from 6 GitHub repositories; a typical one measures about 94.5 × 68.6 mm and carries around 57 components.
88% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.
The most starred is Morro dragon v2 by OPRobots.
Microcontrollers on boards using the QRE1113
What boards using the QRE1113 are built for
QRE1113: common questions
Where can I find a QRE1113 reference design?
Each of the 8 boards on this page is a real design using the QRE1113. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the QRE1113 A pin?
The A pin has a pull-up to 3.3V on 5 of 6 designs, most often 100 Ω (then 220 Ω). Counted from the KiCad layouts of 6 open source designs using the QRE1113.
How is the QRE1113 K pin connected?
The K pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the QRE1113.
How is the QRE1113 pin 4 connected?
Pin 4 is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the QRE1113.
Which microcontrollers do boards using the QRE1113 use?
Most are built on AVR/Arduino (2), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the QRE1113?
The median is 94.5 × 68.6 mm, and 88% are two-layer designs.
What is the most popular open source board using the QRE1113?
By GitHub stars, Morro dragon v2 by OPRobots, with 7 stars.
Can I simulate one of these boards using the QRE1113 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.