HardLabs

SUMEC MK IV

bismarx-v1·Sumec-MiniSumo-HW·main_hw/SUMEC_MK_V/SUMEC_MK_V.kicad_pcb

SUMEC MK IV PCB layout, top view — open source ESP32 board by bismarx-v1
Simulate this board

About the SUMEC MK IV PCB

SUMEC MK IV is an open source ESP32 PCB design by bismarx-v1, published on GitHub. It is a 4-layer board measuring 97 × 37.5 mm, with 100 components from 38 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the TPS565242DRLR, DRV8874PWPR, INA226, AP62300Z6 and 24CW1280T-I/OT. By type, the board carries 31 capacitors, 28 resistors, 13 connectors, 9 ICs, 8 diodes and 5 switches.

It belongs with the robotics & motion designs in this gallery.

From the project

SUMEC is a MiniSumo robot designed by SPŠ na Proseku students. This repository contains hardware source for this project - PCB files and other electronics.

SUMEC - is an autonomous MiniSumo robot, that is designed to compete in MiniSumo competitions. MiniSumo robots are small 100mmx100mm autonomous robots that combine electronics, software and mechanics into one project, their task it to push their opponent out of a ring. This project is led and managed by SPŠ na Proseku students.

Project Contributors: - Antonín Havlík - Head Software Developer - Šimon Šťastný - Head Mechanical Designer and Developer - Jonáš Jarý - Mechanical Developer, Software and Hardware Development Assistant - Lukáš Houdek - Mechanical Designer and Developer, 3D Printing…

Main components on the SUMEC MK IV

TPS565242DRLRDRV8874PWPRINA226AP62300Z6ESP32-S3-WROOM-124CW1280T-I/OTUSBLC6-2SC6BMI088

SUMEC MK IV bill of materials (BOM)

100 components, 38 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
TPS565242DRLR
IC1
2
DRV8874PWPR
IC2, IC3
1
INA226
U1
1
AP62300Z6
U2
1
ESP32-S3-WROOM-1
U3
1
24CW1280T-I/OT
U4
1
USBLC6-2SC6
U5
1
BMI088
U6
2
Q_PMOS
Q1, Q2
1
XT30PW-M
J1
2
Conn_01x06_Socket
J2, J3
1
USB_TypeC
J4
1
Conn_01x04_Pin
J5
1
Conn_01x06_Pin
J6
6
Conn_01x03_Pin
J7, J8, J9, J10, J12, J13
1
Conn_01x03_Pin
J11
1
Buzzer
BZ1
1
Polyfuse/0R
F1
1
SW_DPDT_x2
SW1
4
SW_Push
SW2, SW3, SW4, SW5
Show 18 more
QtyPartRefs
2
D_Schottky
D1, D2
6
LED
D3, D4, D5, D6, D7, D8
1
1.5uH
L1
1
3.3uH
L2
17
100nF
C1, C2, C5, C6, C12, C14, C16, C17 +9
6
10uF
C3, C19, C20, C22, C28, C30
6
22uF
C4, C7, C8, C9, C10, C11
2
22nF
C13, C15
1
2m
R1
12
10k
R2, R3, R4, R8, R10, R11, R12, R13 +4
1
45k
R5
2
100k
R6, R16
2
52.3k
R7, R9
1
1k
R14
5
220R
R15, R17, R18, R21, R22
2
15R
R19, R20
1
0R
R23
1
100R
R28

SUMEC MK IV design files

The KiCad project lives in the bismarx-v1/Sumec-MiniSumo-HW repository on GitHub; these links point at the commit this page was built from.

SUMEC MK IV: common questions

What microcontroller does the SUMEC MK IV use?

The SUMEC MK IV is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the SUMEC MK IV PCB?

The SUMEC MK IV measures 97 × 37.5 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the SUMEC MK IV?

100 components, from 38 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SUMEC MK IV design files?

From the bismarx-v1/Sumec-MiniSumo-HW repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SUMEC MK IV design in my own project?

The repository has no license, so all rights stay with bismarx-v1. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the SUMEC MK IV without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in Sumec-MiniSumo-HW

Similar boards