SiSmaK Piezoelectric Energy Harvesting – Capacitor

BreadhateR·embedded-systems-portfolio·Kicad_Files/Harvester_Piezo_Kondensator/Harvester_Piezo_Kondensator.kicad_pcb

SiSmaK Piezoelectric Energy Harvesting – Capacitor PCB layout, top view — open source board by BreadhateR

About the SiSmaK Piezoelectric Energy Harvesting – Capacitor PCB

SiSmaK Piezoelectric Energy Harvesting – Capacitor is an open source PCB design by BreadhateR, published on GitHub. It is a 4-layer board measuring 13 × 13 mm, with 21 components from 20 distinct parts.

Other key parts include the AEM10300-QFN. By type, the board carries 8 resistors, 5 capacitors, 2 transistors, 2 connectors, 2 diodes and 1 IC.

It belongs with the test & measurement designs in this gallery.

From the project

Capacitor-buffered ultrasonic supply design for the existing SiSmaK sensor-integrated M20 bolt. The circular PCB connects through an FPC interface, stores energy from an external piezoelectric receiver, and delays load connection until sufficient storage voltage is available.

Capacitor-buffered ultrasonic supply design for the existing SiSmaK sensor-integrated M20 bolt. The circular PCB connects through an FPC interface, stores energy from an external piezoelectric receiver, and delays load connection until sufficient storage voltage is available.

Development combined rectification and storage circuitry, a controlled output path, compact PCB layout, and firmware adaptations that divide sensor acquisition into tasks separated by recharge pauses.

SiSmaK Piezoelectric Energy Harvesting – Capacitor, from the project README
From the project README

Main components on the SiSmaK Piezoelectric Energy Harvesting – Capacitor

AEM10300-QFN

SiSmaK Piezoelectric Energy Harvesting – Capacitor bill of materials (BOM)

21 components, 20 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
AEM10300-QFN
IC1
1
CSD25485F5
PMOS_CSD25485F5
Q1
1
CSD17585F5
NMOS_CSD17585F5
Q2
1
FH34SRJ-7S-0.5SH(50)
FH34SRJ-7S-0.5SH_50_
J1
1
CONMHF4-SMD-G-T
J2
2
RB751S40T1G
D1, D2
1
DFE252010F-100M=P2
10uH
L1
1
GRM155R60J106ME15D
10uF
C1
1
GRM188R61A226ME15D
22uF
C2
1
MLASL168BB5226MTNA01
22uF
C5
1
GRMJN65C1H104JE01J
100nF
C6
1
T490B157M010ATE500
150uF
C8
1
RC0201JR-130RL
ZMPP
R1
1
CRCW04023M01FKED
3,01Meg
R2
1
560112110243
45,3k
R3
1
RC0402FR-076M49L
6,49Meg
R4
1
RC0201JR-130RL
0
R10
1
CRCW04022M00FKEDC
2Meg
R11
1
CRCW04024M99FKED
4.99Meg
R12
1
RC0402FR-07475KL
475k
R13

SiSmaK Piezoelectric Energy Harvesting – Capacitor design files

The KiCad project lives in the BreadhateR/embedded-systems-portfolio repository on GitHub; these links point at the commit this page was built from.

SiSmaK Piezoelectric Energy Harvesting – Capacitor: common questions

How big is the SiSmaK Piezoelectric Energy Harvesting – Capacitor PCB?

The SiSmaK Piezoelectric Energy Harvesting – Capacitor measures 13 × 13 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the SiSmaK Piezoelectric Energy Harvesting – Capacitor?

21 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the SiSmaK Piezoelectric Energy Harvesting – Capacitor design files?

From the BreadhateR/embedded-systems-portfolio repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the SiSmaK Piezoelectric Energy Harvesting – Capacitor design in my own project?

The repository has no license, so all rights stay with BreadhateR. Use it as a reference, and ask the author before reusing the design.

More boards in embedded-systems-portfolio

Similar boards